Repair Error 0X80070571: The disk structure is corrupted or unreadable

Updated March 2024: Stop error messages and fix your computer problem with this tool. Get it now at this link
  1. Download and install the software.
  2. It will scan your computer for problems.
  3. The tool will then fix the issues that were found.

The “Hard disk structure is damaged and unreadable” error occurs when the partition on the hard disk is damaged. In this case, Windows cannot access the damaged partition and open its files. While the error is more common with external hard drives, it can also occur with internal hard drives.

If it happens on your internal hard drive, it is much more serious because this is where your Windows installation is installed. In the worst case, you won’t be able to start Windows. This problem is less severe with external drives. Here are some fixes for the “Hard disk structure damaged” error in Windows.

“The hard disk structure is damaged and unreadable. Error 0x80070571 “.

The reasons for this error are as follows:

  • The registry keys are damaged or corrupted.
  • Windows files or settings have changed.
  • The Maxtor 750G Pilot was damaged or corrupted.

This error means that there is a “logical” problem. Compare it to a book whose contents were replaced with colored pencils by a 2-year-old child. The pages are not physically broken or missing, but you cannot “read” the original information in the table of contents.

Sometimes an error 0X80070571 may also appear when trying to remove a folder from your computer. What is the exact cause of the problem and how do I fix it immediately?

Nowadays, external hard drives are more popular because they are portable and available (on an increasing scale). It provides the flexibility to transfer large amounts of data and helps to recover data if a primary website becomes inactive or severely damaged. However, sometimes an external hard drive becomes unavailable or users are unable to access their stored files. Be it a virus attack, damaged directory structure, damaged file system, etc.

Unplug your external hard drive or USB drive and plug it back in

If this error occurs with removable storage devices such as USB flash drives, disconnect the plug from the outlet. Then close all software on the taskbar and reconnect the external storage. Or restart Windows before reconnecting the external hard drive. Then try opening the same files that you created earlier when you saw the “Disk structure is corrupted” error.

Clear the registry

The registry stores all actions and information on your computer. This includes important or unimportant data such as junk files, cookies, Internet history, incorrect registry keys and invalid entries.



Updated: March 2024

We highly recommend that you use this tool for your error. Furthermore, this tool detects and removes common computer errors, protects you from loss of files, malware, and hardware failures, and optimizes your device for maximum performance. This software will help you fix your PC problems and prevent others from happening again:

  • Step 1 : Install PC Repair & Optimizer Tool (Windows 10, 8, 7, XP, Vista).
  • Step 2 : Click Start Scan to find out what issues are causing PC problems.
  • Step 3 : Click on Repair All to correct all issues.

download



If these files are not deleted, they will take up a lot of storage space. This damages the registry and system files.

In addition, it also leads to disk fragmentation, which means that new files are stored in fragments in different locations, so system files take a long time to access. Damaging and corrupting the registry then causes various errors on your computer. One of them is error 0 × 80070571.

Check your hard drive for errors

If you find that the structure of your hard drive is damaged and unreadable, the first thing to do is to check and repair the file system.

The fix for a damaged and unreadable hard drive is to run CHKDSK in the section causing the problem in the Command Prompt (CMD). CHKDSK is a utility that is built into the Windows operating system and can be used to check hard drives connected to a PC for problems and fix any errors found.

So how do you fix the disk structure if the CMD is damaged and unreadable?

You can run this command from the command line (CMD) in the section that gives the error “Hard disk structure is damaged and unreadable” when you try to access it. To do this, follow these steps.

Step 1. Press the Win + R keys to open the Run command. Then type cmd in the box and press Enter.

Step 2. Enter the chkdsk n: / r command (without quotes) and press Enter (n is the letter of the correct hard drive that displays the error. Make sure you entered the drive letter. Correct).

Step 3. When chkdsk finishes running, enter the exit command.

Finally, you can restart your computer and see if the problem is resolved.

Delete and reinstall the drive.

In some cases, the structure of your hard drive is damaged and unreadable. This may be caused by a simple error or by a gap between the hardware (hard drive) and the software that allows Windows to interact with the hardware. If this is the case, you can solve the problem by simply removing the disk from Device Manager and then reinstalling it. Note that this solution only makes sense if the user can still run the Windows installation. You should not use this method on your Windows installation disk. Usually this is C: .

  • Press the key with the Windows + R logo to start the race. Type diskmgmt.msc in the Run dialog box and press Enter.
  • Increase the number of readers. Right-click the disk containing the problem partition. Click Delete. Confirm the action. Click Action in the toolbar above. Click Check for hardware changes.

Wait until the uninstalled drive is recognized and reinstalled. Then reboot your computer and check to see if the startup problem has been resolved.



RECOMMENATION: Click here for help with Windows errors.