- Download and install the software.
- It will scan your computer for problems.
- The tool will then fix the issues that were found.
Error Code 0xc1900223 occurs due to corruption of system files. This problem usually happens because of viruses, malware, spyware, registry errors, hardware malfunction or power loss while installing/installing programs. You might experience problems while trying to install or uninstall programs or games, access shared files across network, print documents or open certain web sites. Error code 0xc1900223 stops you from doing what you want to do most and makes it difficult for you to work effectively.
What’s wrong with my Windows Update?
A software update can fail for many reasons. There are times when you might experience problems while installing a software update. You might even find yourself unable to connect to the Internet during the installation process. If you don’t know how to fix it, here are some common causes and solutions.
1. Your computer doesn’t have enough free space.
If you’re running low on hard disk space, you’ll probably see an error message like “The operation completed successfully.” This is because Windows needs to store information about what files are being updated so it can roll out those changes later. In most cases, Windows uses less than 10MB of space per file. If you’ve run out of room, you’ll likely receive an error message. To resolve this issue, delete temporary files and empty your Recycle Bin.
2. Your network connection isn’t working.
Windows checks for updates every 30 minutes, so it won’t install anything if your network connection is down. Make sure your Wi-Fi router is set up correctly and check your cable modem/router settings.
3. You’re behind a firewall.
Firewalls block incoming connections to prevent unauthorized people from accessing your system. They do this by checking whether the IP address matches one of the allowed addresses. For example, if you use a dynamic DNS provider, such as DynDNS or NoIP, you must add the IP address of your device to the list of authorized devices. Otherwise, you won’t be able to download updates.
How to Fix Error 0xc1900223 When Running Windows Update?
Windows 10 includes automatic updates for security fixes and patches. However, sometimes those updates fail to download properly, causing errors like 0xC1900223. If you receive this error while trying to update Windows, follow these troubleshooting tips to fix it.
Restart your PC
If you are receiving an error code when attempting to install updates, try restarting your computer. This will ensure that Windows is fully up to date and running correctly.
Check your network connection
Make sure that your Internet connection is working properly. If there is no internet connection listed, make sure that your modem/router is plugged into a power outlet and turned on. If you are having trouble connecting to the Internet, contact your ISP for assistance.
Update your drivers
Sometimes, updating your graphics card driver can resolve an error code 0xC1900223 related to Windows Updates. To do this, open Device Manager and locate your Graphics Card. Right-click on it and select Properties. Click on the Driver tab and look for an option called “Driver Version.” Make note of what version number is displayed. Then go to Microsoft’s support site and find the appropriate driver for your operating system. Download the latest version and run the setup program. When prompted, reboot your computer and see if the problem persists.
Replace Software Distribution Folder
The Microsoft Windows Update Service creates a backup copy of the SoftwareDistribution folder every day. This helps it to recover from system failures or corrupted data. If you want to rename the folder, you must delete the backup copies of the folder. You can find the backup copies of the SoftwareDistribution directory in the following location:
You can use the command prompt to rename the folder. To do this, type the following commands into the Command Prompt window:
cd %SystemRoot%\Software Distrubution
rename “softwaredistribution.old” softwaredistribution
If you are using Windows 10, you can use the File Explorer to rename the folder. Right-click on the SoftwareDistribution folder and select Properties. Then, change the name of the folder.
Run Windows Update Troubleshooter
If you are having problems updating Windows 10, there are some troubleshooting steps you can take. One of those steps involves downloading the Microsoft Fix it Toolkit. You can download the tool here. Once downloaded, run the tool and follow the instructions. If the problem still exists, try rebooting your PC again.
Check Windows Update Services
If you are experiencing issues with Windows 10, check the startup types of multiple services listed above. If one service isn’t starting up properly, restart it.
Flush DNS Cache
The most common cause of slow internet connection speeds is due to outdated DNS settings. If you are experiencing slow internet speeds, it could be because your ISP hasn’t properly configured the DNS servers. Your computer uses a local DNS server to translate domain names into IP addresses. When the DNS information changes, it takes some time for your device to update itself. To fix this issue, you must flush the DNS cache. Here’s how to do it.
1. Open up the Network & Internet section of Windows 10 Settings.
2. Click on Change Adapter Settings.
3. Select Advanced Options under Connection Status.
4. Choose Reset.
5. Wait for the process to complete.
6. Restart your PC.
7. Test your speed again.
If you still experience slow speeds, check out our guide on troubleshooting slow internet connections.
Run SFC and DISM Command
The System File Checker tool helps you find and fix problems with Windows 10. You can use it to check whether there are errors with the operating system. If you see anything wrong, you can run the command to fix those issues.
Use DISM to clean up all damaged system files. This tool will scan your PC and remove corrupted registry entries, temporary files and unneeded programs.
Use Media Creation Tool
To install Windows 10 or Windows 10 S, download the Windows Media creation tool. After installing it, choose Keep personal files only if do not want to delete any of the personal files. Then click on Install after completing the setup process.
Update manually using the Microsoft Update Catalog
Microsoft recently announced changes to how it handles Windows updates. This change affects some users who use the Windows Update Catalog to find and install updates. If you want to manually update your PC, here’s what you do.
First, make sure you have the latest version of Windows 10 installed. Next, open the Windows Update Catalog app. Click the Search button near the top left corner of the screen and type in “Windows Update.” A list of options should show up. Select the option labeled “Check now.”
You can also go to the Windows Store and search for “Update for Windows 10.” Once you select the update, follow the prompts to begin the installation process.
After updating, restart your computer and log into your account. From there, you can access the Windows Update settings and choose whether you want to automatically check for updates.
If you don’t see the Windows Update Catalog app listed under Apps & Features, you might not have the latest version of the app. To fix this, head over to the Windows Store and look for “Windows Update Catalog.”
Replace Host File
The hosts file is used to block access to certain sites. If you are having issues accessing some websites, it could be because the hosts file is corrupted. You will need to replace the hosts file with a backup copy.
You can do this manually, but there is an easier way. Simply download the free program called “Hosts Manager.” Once installed, launch the program and select “Scan Hosts Files,” followed by “Add New Hosts File.” Browse to where you saved the hosts file and add it. Then save changes and close the application. Restart your computer and try again.
If that does not work, please contact our support team.
Windows 10 is getting a lot of attention lately because it’s been around for a while now and people still aren’t fully comfortable with it. Microsoft is trying to make things easier for everyone by introducing some new features. One of those features is called Reset Windows. If you want to see how this feature works, here’s what you need to do.
Step 1 – Press Win+R keys together to open the Run dialog box.
Step 2 – Type cmd into the text field and press Enter key.
Step 3 – In the Command Prompt window type netplwiz /reset /force and press Enter.
Step 4 – Restart your computer and let it boot normally.
RECOMMENATION: Click here for help with Windows errors.
Frequently Asked Questions
I Don’t Want to Upgrade! Why Can’t I Use This Version?
If you are using an older version of Windows 10, you may be unable to use some features or apps that are available on newer versions. For example, if you are running Windows 7 or 8, you will not be able to install new apps from the Microsoft Store. You also won’t be able to access certain websites like Facebook and Twitter.
Can I Cancel or Skip Windows from Updating?
Yes you can skip updates for Windows 10 if you want to. You will need to be running an older version of Windows 10 (10240) or later. If you are using Windows 7 or 8.1 then you cannot skip updates.