Something happened and your PIN isn’t available message on Windows 10

The PIN code was a convenient login option available in Windows 10. For devices with trusted platform module Windows Hello PIN-code has hardware protection. It means that if someone knows your PIN-code, they will not be able to use it without a device. Basically you will need a device, because the PIN code is bound to the device.

However, sometimes the PIN code associated with a device cannot be used because of changes in the hardware. In this case you may see the following message on the login screen:

An incident has occurred and your PIN code is unavailable.
Click here to set up your PIN again.

Some users who receive the above message may not have a link to login parameters on the login screen. This creates additional problems for them and they need to take additional steps to resolve this issue. If you also encounter this problem, please read the fixes below.

Use a bootable external device

You can access the CMD via boot media and add another administrator to reset the PIN or password of another user account.

  1. Boot Windows ISO
  2. Create a bootable USB or DVD drive.
  3. Boot from the media and select “Restore computer”. Click here. This will boot your computer into Advanced Recovery.
  4. After you start your computer, select Troubleshooting.
  5. In the Troubleshooting section, select Advanced options.
  6. 6. Select “Command Line” in the “Advanced Parameters” section.
  7. If you manage to open the command line, type the following command and restart your computer:
    Network administrator / active: yes
  8. After rebooting your computer, you should see another administrator account without password. You can log in to this account and then remove the password for another account that is locked in the Control Panel >> User Accounts >> Manage Other Accounts.

Delete the NGC folder and add a new PIN.

According to users, the easiest way to solve this problem is to remove the contents of the NGC directory and recreate your PIN code. This is quite simple and you can do it by following these steps:

  • Go to
  • C: \ Windows \ ServiceProfiles \ LocalService \ AppData \ Local \ Microsoft \ NGC.
  • Remove all files from the NGC folder. To do this, you must log in as an administrator.

After deleting all files from the NGC folder you need to recreate your PIN code as follows:

  • Open the “Settings” application by pressing the Windows + I key.
  • When you open the “Settings” application, go to the “Accounts” section.
  • In the menu on the left, select Connection Settings.
  • In the PIN section, press the Add button.
  • Enter the desired PIN-code twice. When you are done, click OK to save your changes.

After that the problem of logging in with the PIN-code should be solved.

If you know your Microsoft account or local account password

Just click “Login options”, choose a password and login. After logging in, you can delete the existing PIN code and then add a new PIN code.

If this does not work, you can boot in the BIOS settings of your device and make sure that safe booting is enabled and outdated booting is disabled. This configuration may solve the problem immediately.


If you have completed all the steps and the message “Your PIN is no longer available” is still displayed, try changing your Microsoft account password. You can also switch to your local account, create a new PIN, and then switch back to your Microsoft account. If none of the steps help you, you may need to reboot your computer.

To restart your computer, click the power icon at the bottom right corner of the login screen, then click “Restart” while holding down the Shift key. After your computer restarts, use the Preferences screen to select “Select Troubleshooting”> “Reset This Computer.

Fix: Second Monitor Not Detected After Windows 10 Update

Many people today use a second computer screen for several reasons. Connecting a second monitor is useful if, for example, you want to improve performance or gameplay. Using a larger area of the screen also makes the work or entertainment in the system more convenient. and efficient – overall multitasking becomes easier, as does general computing capabilities.

Having a second monitor connected to your computer looks like an additional and useful workspace when you need to keep track of spreadsheets, and both are visible at the same time. If you are a gamer, multiple screens can expand your game world. They can also be useful if you want to edit a task on one monitor while watching, such as videos on the other. You can also quickly switch between applications. Instead of using keyboard shortcuts such as Alt + Tab, you can simply hover your mouse over another monitor.

Despite these advantages, problems with additional monitors can be frustrating, especially if you use multiple displays as part of your normal computing activities. This can degrade performance or affect gameplay. If you have problems with a second monitor, this article is a good place to find solutions.

Some Windows users report that a second monitor was not recognized after a Windows update, a second monitor was recognized but not displayed, or the dual monitor is not working with Windows 10.

These issues, often caused by outdated graphics drivers and installing the latest display / graphics driver, can be resolved if Windows 10 does not recognize the second monitor.

Change the Project Mode

Incorrect project mode may also mean that a second monitor cannot be detected automatically.

  • Press the Windows + P key. A small column with different types of project modes will be displayed.
  • Select a duplicate if you want the same content to be displayed on both monitors.
  • Select Expand if you want to expand your workspace.

Rollback to an older driver

Sometimes these problems can be caused by new drivers not working properly with Windows 10.

If this is your case, you can go back to an older driver version. How to Restore a Driver on:

  • Go to Device Manager and find the display driver.
  • Right-click it and select “Roll Back Driver”.
  • Follow the instructions.

Define monitor settings manually

If your operating system cannot detect another monitor, right-click “Start”, select “Run” and enter desktop.cpl in the “Run” field and press “Enter” to open the display settings. Normally, the second monitor should be detected automatically. If not, you can try to detect it manually.

  • Click the “Start” button, then click the gear icon to open the Settings application.
  • Go to “System” and click “Detect” on the “Display” tab in the “Multiple Displays” column. This button helps your operating system recognize other monitors or displays, especially if they are older. Here you can also connect to a wireless display.

Also, make sure that the panel below is set to develop these ads.

Troubleshooting hardware

  • Try replacing the HDMI cable connecting the second monitor. If it works, we know that the previous cable was faulty.
  • Try using a second monitor with a different system. This will help determine if the problem is with the monitor or the primary system.
  • Start the hardware and device troubleshooter and check.

Reinstall the graphics driver

To reinstall the graphics card driver, which may be damaged or cannot work properly:

  • Open Start.
  • Find Device Manager and click on the highest result to open the application.
  • Double-click to expand the Graphic Maps branch.
  • Right-click on the adapter and select “Remove device”.
  • Uncheck the Uninstall software driver for this device box.
  • Click the Uninstall button.
  • Reboot your computer.
  • Open Device Manager again.
  • Right-click the computer name and select Scan for hardware changes.

After you complete the above steps, Windows 10 will try to automatically reinstall the graphics driver at startup. However, it is recommended that you follow these steps to ensure that the driver is installed correctly.

Fix Can’t Connect to Blackberry Hotspot on Windows 10 (Solved)

When mobile hotspot mode is enabled, the BlackBerry smartphone can be used as a mobile hotspot so that other Wi-Fi-enabled devices can use the BlackBerry smartphone’s connection to the mobile network.

Are you trying to connect to your BlackBerry mobile access point using a Windows 10 computer?

Some Windows users cannot connect to their Blackberry mobile access point because the network is not recognized by the wireless device list.

Simply follow these steps in the order below and you will be able to connect to your Blackberry access point, typically using Windows 8, Windows 8.1 or Windows 10.

If you can’t find the Blackberry Mobile Hotspot, first run the network troubleshooter on your Windows 8 / Windows 8.1 / Windows 10 system.

They will also troubleshoot connectivity problems to make sure that it does not work properly.

Run the Network Adapter troubleshooter

Follow the instructions below:

  1. Enter the fix in the search box.
  2. Select Troubleshooting.
  3. Select “Show all” in the upper left corner.
  4. Click Network Adapters.
  5. Follow the on-screen instructions to troubleshoot the problem.

If the problem persists, follow the method below.

Control the connections to the mobile access point on your smartphone:

  • Open options.
  • Select Network & Connections> Mobile Access Point Connections> Options.
  • In the Mobile Access Point connection settings, the user can:
  • Edit the network name (SSID).
  • Select the security type. Available options are: No, WEP, WPA2 Personal and WPA / WPA2 Personal.
  • Note: WEP, WPA2 Personal and WPA / WPA2 Personal. Disconnect the network security only when connection problems are corrected. An unprotected network may result in high data usage and high costs.
  • Select a group. Available options are 802.11g and 802.11bg.
  • Select an option to allow or disallow communication from devices connected to the network.
  • Set the automatic shutdown timer. This will automatically disable the mobile access point if no devices have been connected to the network for a specified period of time. Available options: Never up to 1 hour (in 5 minute steps).

Activate and deactivate the mobile access point

Follow these steps to enable or disable your mobile hotspot over Wi-Fi:

  • On any home screen, tap and drag the status bar down.
  • Touch Settings.
  • Touch Network Connections.
  • Touch the Portable access point.
  • Tap the switch on the mobile access point to turn it on or off.
  • Tap a note. When you turn on your phone, it transmits its Wi-Fi network name (SSID), so you can connect to five computers or other devices. The standard SSID for your phone is “T-Mobile Blackberry [XXXX]”. If the mobile hotspot is enabled for smartphones, your phone displays an access point icon in the status bar on the home screen.

Sharing your connection via USB

To share your cellular data connection with your computer using a USB cable: 1:

First access

  • Connect your phone to your computer using a USB cable.
  • On any home screen, tap and drag the status bar down.
  • Touch Settings.
  • Touch Network Connections.
  • Tap “Shared Internet.
  • Check the information, and tap Next.
  • Tap Next, and then tap Next again.
  • Tap Connect to, and then tap USB.
  • Tap Next.
  • Tap the Internet Connection Sharing switch to enable it. When your phone breaks the connection, the Connection Sharing icon appears in the status bar on the Home screen.

After your first access

  • Connect your phone to your computer using a USB cable.
  • On any home screen, tap and drag the status bar down.
  • Touch Settings.
  • Touch Network Connections.
  • Tap Internet Connection Sharing.
  • Tap the Internet Connection Sharing switch to enable it. When your phone breaks the connection, the Connection Sharing icon is displayed in the status bar on the Home screen.

Fix: “You need an extension to use this file” Photos App Video Editor Error

When Microsoft removed Windows Movie Maker, many were saddened. It wasn’t the most powerful video editor in the world, but it was free, easy to learn, and can be used anytime. Other video editors were also available, but most of them had paid options or required a lot of training. However, a recent Windows update added many of your favorite video features to Movie Maker right in the Photos app.

If you want to view a video or photos on your Windows 10 computer with the built-in photo video editor and receive an error message, you need an extension to use that file. This article should help you. In this article, we’ll introduce you to the options available to try and solve this problem successfully.

HEIF (High Efficiency Image File Format) is an image and video container designed to significantly improve file compression. At the same time, it still offers better image quality and additional advantages over older formats (such as JPEG, PNG and GIF), as well as videos that use the High Efficiency Video Codec (HEVC) specification.

Automatically convert files by re-importing them or sending them by email

Many devices automatically convert HEIC photos and HEVC videos to a more popular format when transferring or sending files by email. Connect your iPhone or Android to your computer and move your files. Or just send the files to yourself from your phone and save them on your computer.

Then try adding the files to your video project:

  • Open your video project in the Photos app.
  • Select Add from this PC>.
  • Find and select the files.

Enable HEIF codec support in Windows 10

If extensions are not already installed on your computer, the Pictures app will provide a link to download them from the Microsoft Store. The only limitation is that for some reason you will be redirected to a paid version of the extensions. However, these packages are available free of charge via various links.

Note: The HEVC codec must be installed on your device automatically. However, you can still do the following steps to get it. If you already have a HEVC codec, you just need to install the HEIF codec.

To add support for HEIF in Windows 10, follow these steps:

  • Open your web browser.
  • Use this link in Microsoft Store to access the HEVC extension.
  • Click the Get button.
  • Click the Open button.
  • Click the Install button.
  • Use this Microsoft Store link to access the HEIF extension.
  • Click the Get button.
  • Click the Open button.
  • Click the Install button.

Following these steps, you can view the files that have been encoded using the HEIF photo container or any other compatible application, such as Microsoft Paint.

Use the OneDrive to automatically convert your photo files

This solution includes uploading HEIF and HEVC photos and videos to the OneDrive.

To preserve the quality of the original photos and save storage space, OneDrive on iOS will upload HEIF photos in their original format from September 2019 instead.

HEIF and High Performance Video Coding (HEVC) are standard file formats for photos and videos on most Apple devices with iOS 11 or newer. Most Mac, iPhone, and iPad computers can open these files. You can also view these files on the OneDrive website.

If you want to continue to work with photo and video formats other than HEIF, you can update the camera settings on your Apple device to take photos and videos in other formats.

Here’s how it works:

  • On your iOS device, open Settings, then click Camera > Format.
  • In the Capture cameras section, touch Most compatible.
  • To make sure it works, add files to your video project by selecting “Add”> “From this computer” and going to the files.

Repair Windows Update error 0x80070436 on Windows 10

Windows Updates are essential for the stability and proper functioning of the Windows 10 operating system. If you encounter error code 0x80070436 when trying to install updates on a device with Windows 10, this article should help you. In this article we will identify possible causes and suggest appropriate solutions that you can try to solve.

If you encounter this error from the Windows Update Center 0x80070436, you can try our recommended solutions in the order below to solve the problem.

Use the Troubleshooting Tool to restore the Windows Update

Windows 10 comes with the Windows Update Center Troubleshooting Tool that can diagnose and fix common problems with this feature.

To use the Troubleshooting Tool to troubleshoot your Windows Update Center issues: 1:

  • Open the settings.
  • Click Update and Security.
  • Click Troubleshooting.
  • From the Startup section, select the Windows Update Center option.
  • Click the “Perform Troubleshooting” button.
  • Click the Close button.

After you complete the steps, the Troubleshooting Tool will diagnose and fix any problems that you find. You can then update them again.

Run the Windows Update again.

Even if you downloaded some updates, they may be available more. After the previous steps, run the Windows Update Center again by selecting:

Start> Options> Update and Security> Windows Update Center> Check for updates.

Download and install the new updates.

Check the Device Manager for errors.

  • Enter Device Manager into the search box in the taskbar, and then select Device Manager from the results list.
  • In the window that appears, find the device with the yellow exclamation mark. (You may need to select each category to view the list of devices.) Select the device name.
  • Select “Action”, then “Update Driver” or “Delete” to correct the errors.

Restart the Windows Update service.

1] Click Win + R to open the “Run” window. Enter the services.msc command and press Enter to open the Service Manager.

2] Find the Windows Update Center service in the list alphabetically. Right-click it, then click “Restart”.

3] Reboot the system and see if it helps.

Re-register the Windows Update Center files

Re-registering the Windows Update Center DLL files will help solve the problem if nothing else happens.

Note. Before attempting to perform this update, make a backup or restore point for your system.

1] Find the command line in the Windows search bar. Right-click the icon and select “Run as administrator”.

2] Enter the following commands in order in the administrator command line and press Enter after each command:

  • regsvr32 wuapi.dll
  • regsvr32 wuaueng.dll
  • regsvr32 wups.dll
  • regsvr32 wups2.dll
  • regsvr32 wuwebv.dll
  • regsvr32 wucltux.dll

3] Exit the command line after all these commands are executed and restart the system.

Perform a reboot, on-site update or cloud reset

If the problem is not solved at this stage, it is most likely due to a system failure that cannot be corrected in the usual way. In that case, you can try to repair all Windows components by restarting them and updating them in place. If you are running Windows 10 version 1909 or later, you can try Cloud Reset and see if it helps.

How to Fix Windows Update error 0x80246010 on Windows 10

Can’t I update my Windows 10 system and get an update error code 0x80246010? If you answered YES and want to fix this error, you got to the right place.

This blog will tell you all about Windows 10 update error 0x80246010.

Error code 0x80246010 may appear when a user tries to download an available update on his Windows 10 system. Once this error occurs, the user will not be able to install the Windows updates available on the PC. / Laptop and applications.

This update error is very common and reported by many Windows 10 users. The Windows 10 update error code 0x80246010 normally appears when a user tries to install an update KB4038782 for the system d Running Windows 10. However, there are many other available updates which cause this error code to occur.

This error code is usually caused by different causes. These are some of the most common causes:

  • Missing / corrupted DLL files
  • Damaged or corrupted registry keys
  • Incomplete updates
  • Computer malware
  • And other similar problems.

Clear the Windows Update Center temporary cache folder:

  1. Hold down the Windows key while pressing the “R” key.
  2. A small new window will appear.
  3. Enter % windir% \ SoftwareDistribution \ DataStore in this new window and press OK.
    4 This will open up Windows Explorer in the right place.
  4. Remove all content from this folder. (Note: use Ctrl + A to select all files and folders).

Restart Windows Update service.

  • Click Windows Key + R to open the Run dialog box.
  • Type services.msc and press Enter.
  • Scroll down until you find the Windows Update Center service.
  • Right-click it and select Start.

Enable important Windows Update Center services

Proceed as follows:

  • Press the Windows + R key to open the “Run” dialog box.
  • In the Run dialog box, type cmd and press CTRL + SHIFT + ENTER to open the command line in Supervisor / Advanced mode.
  • In the command line window, type in the following command in the order indicated and press Enter after each line to set the startup type for each service to automatic:
  • Starting a trusted SC config installer = auto
  • Start of configuration bits SC = auto
  • Configuration SC cryptsvc start = auto

After running the command and running the services, restart the computer and see if the problem is solved at the next full boot. Otherwise, move on to the next solution.

Rename the software distribution folder

  • Open the “Run” dialog box by pressing the Windows + R keys.
  • In the “Run” field, enter the services.msc file and press Enter.
  • Now find the Windows Update service, right click the Windows Update service, and click Stop.
  • Go to your local drive (C 🙂 -> Windows and find the software distribution.
  • Now you need to rename the SoftwareDistribution folder. To do so, right-click it and select “Rename” in the cascading menu.
  • Change the name to SoftwareDistributionOld.
  • You will need to repeat steps 1-4, but instead of clicking Stop, you need to select
  • Finally, reboot your computer and make sure that the problem is solved or not.

Manual Update using the Microsoft Update Center directory

If you don’t mind choosing a manual path, you can probably solve the problem completely by installing an update that does not work manually. The most convenient way to do this is to visit the website of the Microsoft Update Center catalog.

Some users encountering the same problem reported that the 0x80246010 error code no longer appears when using the manual method.

How to Fix Windows or Microsoft Store Won’t Open

Windows Store is a very useful feature for many users who download and install the latest apps for their daily work. There are also many games and other apps that many children want to play. This way, you can see that it is versatile for adults and young children. But what if you can’t open the Windows Store? Well, here’s the thing. Many users report that the Windows Store does not open or download. In short, the Windows Store does not start, and you are waiting for it to show up.

This is because Windows Stor may have been corrupted, there is no active Internet connection, proxy server issues, and so on. D. So, you can see that there are a number of reasons why you are facing this problem. Without wasting time, let’s take a look at how to fix the Windows Store in Windows 10 using the troubleshooting guide below.

Reboot the store and your computer

If you can’t open your shop the first time, don’t panic, it may only be temporary. I suggest you restart your shop and see if it opens. If it still does not work, restart your computer and try again.

Use Powershell

  • Open the Start menu and enter the Powershell search box.
  • Right-click on the Powershell icon and select Run as administrator.
  • Type: Get-Add-AppXPackage -AllUsers | For each {Add-AppxPackage -DisableDevelopmentMode -Register “$ ($ _. InstallLocation) AppXManifest.xml”}.
  • Press Enter to launch the command.

Upgrade your Windows 10

Since the Store is a Windows component, the Windows 10 Update Center will update your version of the Store. Windows has received many updates recently. Therefore, it is important to check for updates and install them if they are detected.

  • Open “Settings” on the Start menu.
  • Click Updates and Security.
  • Click the Check for Updates button. Your computer then checks for updates that it finds, downloads and installs.

Make sure you have enough room.

If you don’t have enough disk space, this could be the reason why the Microsoft Store doesn’t start. In this case, clear the system partition.

Remember that if you do not have enough free space, Microsoft Store updates and installations may hang.

Be sure to remove applications and programs that you don’t use often. Also, move media files to another partition when you store them on an external storage device.

Disable Proxy Connection

Sometimes proxy server settings may prevent you from opening the Windows Store. Try disabling the proxy connection, launch apps, and check them out.

  • Find and open “Browser Properties”.
  • On the Connections tab, click LAN Settings.
  • Uncheck the Use a proxy for your local network check box and click OK.

Windows Store App Troubleshooting Tool

Launch the Windows Store Troubleshooter, which will automatically detect and fix some of the major problems that may prevent you from launching your Store or apps, such as: B. lower screen resolution, security or incorrect account settings, etc.

  • Open Windows Settings, then Update and Security.
  • Select Troubleshooting on the left, and then select Windows Store.
  • Click Start Troubleshooting to allow Windows to investigate and fix problems so that the Windows Store does not open properly.

Get the best apps from the Microsoft Store for Windows

This can be frustrating when something simple, like Microsoft Store, is not working properly. I hope that the above solutions have fixed the problems.

Now that the Microsoft Store is up and running, it is time to add the best applications to your system.

How to Fix NVIDIA Control Panel Missing on Windows 10

Users with a Nvidia graphics card installed on their PC still had the opportunity to change some graphics settings using the Nvidia Control Panel. However, sometimes you encounter a problem when you can’t find the Nvidia Control Panel, and this is definitely a problem.

There are several ways to restore the Control Panel. However, some of these solutions may seem tedious and complicated. In any case, you should read the rest of this article to find the solutions that should solve the problem for you.

What causes this error?

There is no direct cause for this error at the moment. However, there are several possible causes for the lack of an NVIDIA Control Panel in Windows 10. The most common reasons:

  • Graphics card driver issues: It is possible that the problem is related to the graphics card driver. This could mean an outdated driver, damaged driver files, or compatibility issues. You can update your drivers. Keep reading our article to find out how!
  • Windows Update Center: Have you recently upgraded or upgraded to Windows 10? If so, your graphics card driver may no longer be compatible with your system.
  • Missing or incorrect registry entries: The registry is used to manage many settings on your computer. If any registry entries are missing or incorrect, the control panel may not show up on your computer. To solve this problem, you need to use the registry editor.
  • NVIDIA Control Panel is corrupted: the NVIDIA Control Panel itself may have been corrupted. One way to solve this problem is to completely reinstall the Control Panel.
  • Other bugs: Some common errors and Windows 10 bugs may cause the NVIDIA Control Panel to be missing.

Now that we have identified possible causes, we can begin to troubleshoot the problem. Here are five methods you can use to fix the missing NVIDIA Control Panel in Windows 10.

Restart NVIDIA Services to fix the problem that is missing from the NVIDIA Control Panel.

Sometimes the NVIDIA Control Panel may no longer appear in the context menu of the desktop and in the taskbar. Another basic method you can try is to restart NVIDIA services. Let’s see how to restart these services on your PC:

Step 1: Open the Run window by simultaneously pressing the Windows + R keys. Now type services.msc into the Run field and press Enter.
Step 2: The “Services” window will open. Here you will find all the services running on your computer. In the list of services, find the services whose names begin with NVIDIA. Select each NVIDIA service and click the “Restart” button on the left side of the window.

If the service is not running, right-click and select Start.

Unhide the NVIDIA Control Panel

Your NVIDIA Control Panel may be hidden by Windows when you update a previous version or software that accidentally changed the graphics settings. You can open the NVIDIA Control Panel from the Windows Control Panel and then display it in a context menu on your desktop. Do it:

1) Press the key with the Windows logo and R on the keyboard to open the Run dialog box.
2) In the Run dialog box, type control and press Enter on the keyboard. This will open the control panel (from Windows).
3) From the control panel, select “Large Icons” from the “View by” section.
4) Select the NVIDIA Control Panel.
5) In the NVIDIA Control Panel, click “Screen” or “Desktop” and activate the Add Desktop pop-up menu.
6) Right-click on your desktop and see if your NVIDIA Control Panel appears again in the context menu of your desktop.

Update your graphics card driver

  1. Press the Windows + R keys, type “devmgmt.msc” (without quotes) and press Enter to open Device Manager.
  2. Then expand “Video Cards”, right-click the Nvidia graphics card and select “Activate”.
  3. When you do it again, right-click the graphics card and select “Update driver software.
  4. Select “Automatically look for updated drivers” and wait until the process is complete.
    5.If the above step helped solve your problem, everything is fine. Otherwise, go ahead.
  5. Select “Update Driver Software” again, but this time on the next screen select “Find Drivers on My Computer”.
  6. Now select “Allow selection from device driver list on my computer”.
  7. Finally, select the latest version of the driver from the list and click Next.
  8. Wait until the process described above is complete and reboot your computer to save the changes.

Once the graphics drivers are updated, you may be able to fix the missing NVIDIA Control Panel in Windows 10.

How to Fix ERR_FILE_NOT_FOUND error on Google Chrome

There is no doubt that Google Chrome is currently the most commonly used web browser. The web browser is available on almost all major platforms including Windows, Linux, Android, iOS, etc. E. As with any other web browser, Google Chrome also has a few bugs. One of these errors is known as error 6 (net: :). ERR_FILE_NOT_FOUND).

What is the error 6 (net :: ERR_FILE_NOT_FOUND)?

Usually ERR_FILE_NOT_FOUND occurs in Chrome when users try to open a particular website or website. In most cases, the error occurs due to extensions of Chrome. In this case, disabling the extension which causes web browser to display error message ERR_FILE_NOT_FOUND may solve the problem.

The error also occurs due to corrupted Chrome data files or extension installer files. Here are some of the best methods you can use to quickly fix the bug report.

Remove the default extension from the tab

Expanding the default tab of your Chrome browser may be the real culprit for this error. This is a browser hijacker that comes with free software that can change your browser settings without your permission. If you remove this extension, you can find it in the list of extensions the next time you open the “Extensions” tab.

  • Open the Control Panel first to get started.
  • After opening, select “Programs and Components” from the list of all Control Panel items.
  • Now find the Standard tab among all the applications listed there.
  • When you find the application, right-click on it and select “Delete”.
  • When User Account Control appears on the screen, click Yes.
  • Click “Uninstall” again to uninstall the application with no recovery option.
  • Now open your Chrome browser and go to the top right corner of the screen.
  • Click the three dots icon and select Options from the list of options.
  • Select Extensions from the left side pane and remove the extension from the Standard tab.
  • When you are done, visit the website again and see if this solves the problem.

Determine which extension is causing the problem, and remove it.

If your Chrome list of extensions does not include the standard extension on the tab, the only plausible explanation is that an extension other than the standard extension on the tab causes error 6. In that case, you should:

  • Open Google Chrome. Click the “Hamburger Menu” button in the upper right corner of the window. Click Settings.
  • On the left pane, go to Extensions. Disable and deactivate all existing Chrome extensions in the right pane. Activate any extension, restart Chrome and see if error 6 is still present. If you don’t see bug 6 as it was before, then the extension you enabled is not the cause. If so, repeat these steps over and over again, each time activating a different extension number.
  • The reason is that error 6 occurs when only this option is enabled. Once you have determined which extension is the culprit, go back to Extensions and remove it by clicking the Trash icon next to the Enable checkbox and clicking Delete to confirm the action.

Reset Google Chrome

  • Click “Configure Google Chrome” to open the browser menu.
  • Select Settings to open the tab below.
  • Scroll to the end of the tab and click “Advanced” to view more options.
  • Scroll the tab a little further to the Reset option. Click Reset, and then click Reset to confirm.

Resetting Google Chrome to its default settings may also be a good solution for error 6. This will disable extensions and Chrome themes and remove temporary data.


Google Chrome extensions are the best resource for developers to create extensions for browsers. Extension development is also based on coding, so there are often errors during development. Today we are discussing one of these common errors, namely ERR_FILE_NOT_FOUND. This error usually occurs when we want to add a file or script into the Chrome extension. Chrome cannot select a file and then displays the error ERR_FILE_NOT_FOUND.

How to Fix Windows Update Error 0x80070bc2 on Windows 10

To provide Windows operating systems with the latest features and eliminate existing security vulnerabilities and bugs as soon as possible, Microsoft provides registered releases with new updates to all users by the second Tuesday of each month. However, it is this process, implemented through the Update Center, that often causes disappointment for many users. For example, the update process often ends ahead of schedule – ironically, due to an error. The Update Center then displays user error codes such as “0x80070bc2” that can confuse users. We will explain what this message means and how to fix the 0x80070bc2 error.

This manual provides instructions on how to fix the Windows 10 0x80070BC2 update error.

What does the Windows error message “0x80070bc2” mean?

The error code “0x80070bc2” indicates an error that occurs during the installation of new cumulative updates to Windows 10. This may include the following updates:

  • KB4056892
  • KB4074588
  • KB4088776
  • KB4093112

All these updates were released in 2018. Often clicking the “try again” button displayed by Windows does not eliminate the cause of the problem. They can occur for a variety of reasons. For example, the 0x80070bc2 error may be related to the update service or Windows as a whole does not work correctly. In addition, you may experience difficulties as the corresponding update is already installed. However, in some cases, third-party security software may cause the update process to fail.

Clear Windows Update Center cache

The Windows 10 software distribution folder is a folder in the Windows directory that temporarily stores files you may need to install the Windows Update Center on your computer.

Remove the contents of the software distribution folder and see if this helps correct the error in the Windows Update Center 0x80070bc2. Otherwise, skip to the following solution.

Perform a Clean Boot

A software conflict may also cause a Windows 0x80070bc2 update center error in Windows 10. A clean reboot must be performed to prevent this. Follow these steps:

Step 1: Simultaneously press the Windows + R keys on your keyboard to launch the “Run” request.

Step 2: Enter “msconfig” and press “OK”.

Step 3: In the “System Configuration” window, go to the “Services” tab, check the “Hide all Microsoft services” box and click “Disable all”.

Step 4: Go to the Start tab and click on “Open Task Manager”.

Step 5: Select each auto-download item and click Disable.

Step 6. Close Task Manager.

Step 7. Repeat steps 1 to 3, click the Home tab and click OK.

Step 8. Reboot the computer.

Manually download the update from the Microsoft Update Center catalogue.

With this solution, you need to manually download an update that cannot be installed from the Microsoft Update Center’s directory and therefore cause the Windows Update Center 0x80070bc2 error. You then need to install the update on your Windows 10 computer.

Set up a trusted installer to start automatically

To automatically start the Windows Module Installer and the three other services:

  • Right-click on “Start” and select “Run”. Enter Services.msc and click OK.
  • Scroll down until you find the Windows Module Installer and double-click the service.
  • Set the startup type of the service to automatic
  • Click OK.
  • Also configure the following services for automatic start.
  • Windows Update Center
  • Intelligent background transmission service
  • Cryptographic services
  • Close the “Services” window.

Or at the command line:

If you want to automate the above configuration from a command file or command line, use these commands from the command line with elevated privileges or from the administrator:

  • SC config wuauserv start= auto
  • SC config bits start= auto
  • SC config cryptsvc start= auto
  • SC config trustedinstaller start= auto

Reboot Windows and see if you can now install Windows updates without getting 0x80070BC2 errors.


That’s it, guys! Did it work for you?

Please leave a comment in the comments section below or better yet: Take a liking and share this blog post on social networking sites to spread the word about this decision.