Error 0x80242016 on Windows 10 [SOLVED]

Windows 10 includes automatic updates for security patches and fixes. However, sometimes it fails to install some important updates. If you are facing such issues, follow the steps mentioned below to resolve this problem.

Step #2 – Click Check For Problems button under Troubleshoot section.

Step #3 – Select Advanced Options and select Show Details option.

Step #4 – In the list of problems shown, look for the following errors:

0x80242016 – An update failed because the previous operation did not complete successfully.

0x80070002 – A required file is missing or corrupt.

What is error code 0x80242016?

Error code 0x80242012 is one of those common errors that are easy to fix if you know what it means. If you don’t understand how to fix it, though, you might end up wasting hours trying to figure out why your computer won’t boot properly. Here’s everything you need to know about this error code.

How do I find out what error code 0x80 24 2016 means?

You’ll want to look up error code 0x80 2402 2016 online because it’s a fairly obscure error code. There aren’t many resources out there explaining what this error code actually means. However, we’ve put together a list of some of the best sites where you can learn more about this particular error code.

Windows 10 error codes – What does error code 0x80 mean?

The most popular site for learning about error code 0x8024020 is Microsoft’s support website. They explain this specific error code as “a system error occurred during startup.” You can also read more about this error here.

Microsoft Support | Error Code 80242012

Another great resource for learning about error code 80 2402 2016 is the Microsoft Knowledge Base. On this page, you can see a full explanation of each individual error code along with a description of what causes it.

How to fix Windows Update Error 0x80242016

Windows Update error code 0xc0000021 is one of the most common errors reported by Windows 10 users. This error occurs due to some issues related to the Microsoft Windows operating system. In this article we will discuss how to fix Windows Update error code 0x80242016.

The error code 0x80 24 2016 appears when there is a problem while updating Windows 10. You might see the following error messages during the process:

• Error Code 0x80242016 – A critical update failed to install properly because of an unexpected failure.

• Error Code 0xc0000001 – An unknown error occurred while installing security updates.

• Error Code 80242016 – An unexpected error occurred while downloading updates.

Solution: To fix the error code 0x80 2402 2016, follow the steps mentioned below:

1. Open the Start menu and type “windowsupdate”. Then select “Update & Security” option.

1] Try some general troubleshooting methods

If you’re having trouble installing Windows 10 Anniversary Update, try restarting your PC. If it still doesn’t work, check whether your system clock is correct. You can also try downloading the latest version of Windows 10 directly from Microsoft.

2] Run Windows Update troubleshooter

Microsoft recently launched a new version of Fixit tool to help you fix common problems with Windows 10. If you are having trouble updating, installing apps, connecting to Wi-Fi networks, and browsing the web, then the Fixit tool can help. You can download it here.

3] Run DISM and SFC scans

Running DISM and SFC commands will help you identify and correct problems with corrupt system files. These are the most common causes of PC errors. If you see error code 0x80242016, it means that there is an error with your system files. You must run DISM and SFC to repair corrupted system files.

To do this, follow these steps:

1. 2. In the left pane, select Troubleshoot.

3] Select Disk Cleanup.

4.] Select Scan for Problems.

5.] When prompted, select OK.

4] Reset Windows Update components

If you are facing “Windows Update cannot install or uninstalling any software” error while installing/uninstalling any application, it could be due to corrupted files related to Windows Update component. In such cases, you can use the Reset Windows Update Components Tool to fix the problem.

This tool will reset all the Windows Update components including the Windows Update Service and the Automatic Updates service. You can run this tool even if there is no problem with the Windows Update.

To reset Windows Update components, follow the steps given below:

1] Download Reset Windows Update Components tool from the link mentioned above.

2] Run the downloaded file.

3] Click Next button.

4] Select the option to reset all the Windows Update component.

5] Disable third-party antivirus

Microsoft has been rolling out several security patches for Windows 10 over the past few months. However, some users have reported issues installing these updates due to third-party antivirus programs blocking it. Microsoft recommends disabling the antivirus program to install the update successfully. You can do this by following the steps mentioned here. Once done, check whether the problem persists or not. If yes, re-enable the antivirus software to make sure it doesn’t interfere with future updates.

6] Disable Proxy Connection

The proxy connection is used to download Windows Updates. If you are unable to connect to the internet, it might be because of a proxy connection. To disable the proxy connection, follow the steps mentioned below.

Open Control Panel

Select Internet Protocol Version 4 (TCP/IPv4)

Right Click on the proxy connection and select Properties

Uncheck Use this connection whenever possible

Close the window

Restart the computer

7] Restart relevant Windows services

Restarting the following Windows services might help resolve issues related to slow performance:

1. IIS

2. SQL Server

3. SMTP

4. DNS

5. DHCP

6. NAP Client

8] Download and install updates manually

From the list, select the Update that gives you an error 0x80242016.

Click on the Download button to start downloading the update.

Doubleclick on the downloaded file and follow the instructions to install it.

How can I get Windows Update 91% to work again?

Windows Update is one of those features you just don’t want to mess with. But sometimes it does happen, and you’ll find yourself staring at a screen full of red error messages and wondering what happened. This article will help you figure out how to fix 90% stuck windows update errors.

First things first, make sure you’re running the latest version of Windows 10. If you’re still running Windows 8.1, you won’t see this issue.

Next, check your computer’s power settings. You might be able to solve this problem by turning off automatic restarting of devices.

If that doesn’t work, try resetting your device. To do this, hold down Shift+F10 while booting up your PC. When prompted, press Enter to continue. Then select “Reset this PC”. Afterward, reboot your system again.

If none of these solutions work, you can always run a virus scan. We’ve got some great free tools here at PCMag that can help you clean up malware and viruses.

Finally, if everything else fails, you can always call Microsoft support. They are very good about helping people with problems like this. Just remember to provide them with enough information to diagnose the issue.

Frequently Asked Questions

Who pays for updates to Windows?

Microsoft pays for updates to its own operating systems, like Windows 7 and 8. But you’ll have to pay for them yourself if you’re using an older version of Windows, like XP, Vista, or 2003. Microsoft offers free security patches here.

How much does it cost to get a Windows update?

Most Windows updates cost between $20 and $30. Here is where you can find out how much each update will cost.