- Download and install the software.
- It will scan your computer for problems.
- The tool will then fix the issues that were found.
To fix Windows 10 update error code 0x80070070, check to see if it is caused by not enough space on your hard drive. If you find out that there is no sufficient space left on your hard drive, you can delete some unnecessary files and move them to another partition or even an external drive. You can uninstall unused programs to free up space.
1. Check Disk Space
Open System Information window by clicking Start button, type “disk”, and press Enter. Then, go to Advanced tab, select Performance, and click Change Settings. In the dialog box, choose Optimize Drives Now option, click OK, and wait for completion.
2. Delete Unnecessary Files
Find the program that causes the error, and delete it. Click Apply, and restart your computer.
3. Move Some Data to Another Partition/Drive
You can use third-party software like CCleaner, WinSweeper, or DriveSpace to clean up your system registry. These tools are able to locate and eliminate temporary files, cache files, cookies, and even old log files. They can also scan your entire hard drive to detect and delete invalid shortcuts, broken shortcuts, orphaned files, and empty folders.
Solution 1. Using the Disk Cleanup Tool to make more room on the C drive
If you are facing Error Code 0x8007000E while installing Windows 10 1809, it could be due to insufficient storage space on your hard disk. In such cases, you need to clean out temporary files and junk data from your computer. This way, you can make room for installation of Windows 10 1809. We recommend you use Disk Cleanup tool to do so. Here are some steps to follow:
1. Click Start button and type “Disk Cleanup”. A window will open showing options like “Clean up System Files”, “Delete Old Kernel Images”, etc. Select one option depending upon what you want to delete.
2. Once selected, click OK.
3. Now select “More Options…” and click on the “System Restore” tab.
4. Select “Create a restore point now” option and click Next.
5. Now choose a location where you want to save the backup file. Then click Next.
6. Finally, click Finish.
Solution 2. Set up disk limits or disk quotas
To avoid Windows update error 0X80004005, you can either turn off Disk QuotAs or reduce the limit disk storage space. When Disk Quotasare turned off, the computer won’t show any warning messages about reachingthe limit disk space. Thisis great news for those whowant to keep their computersclean without worryingabout running out of free space.
Method 1: use Registry Editor to delete theregistrykeyHKEY_LOCAL_MICROSOFTWINNTCURRENTVERSIONWINLOGONSHELLEXSTYLE.
Method2: run thecommandregeditfromtheStartmenuThennavigate to thefollowingpath:HKEY_LOCALMACHINESYSTEMcontrolset001serviceslancaserverparametersdelete thevaluenamedShellExstyle.
– In 2018, Americans spent $1.7 trillion on healthcare, accounting for 17% of GDP.
– By 2026, it is projected that health care spending will account for 19% of GDP.
Solution 3. Extend the System Partition
To extend system partition, you must use MiniTool Partition Wizard Bootable Edition to resize it. You can follow the steps below to do so.
Step 1. Download MiniTool Partition Wizard and extract the downloaded file. Run the program. Click “Next”.
Step 2. Select the target partition. Click “Next”. Note that you must select the whole partition.
Step 3. Choose the size of the extended partition. Click “Next” to proceed.
Step 4. Click “Finish”.
After completing the above step, you can reboot your computer and check whether the operation is successful.
If everything goes well, you can now try to repair the Windows Update error 0x8007007A.
Solution 4. Make the Windows Recovery Partition bigger.
Windows 10 does not allow us to increase the size of the Windows recovery partition. But there are some methods that can help you to do it. In this article, I will show you how to increase the size of Windows recovery partition.
Step 1. Download MiniTool Partition Wizard Professional Edition.
Step 2. Run MiniTool Partition Wizard. Click Next button.
Step 3. Select the disk where you want to install Windows. Then select the partition where you want to install windows. Click Next button. Note: Do not select the system reserved partition.
Step 4. Choose the file format of the installation media. Click Next button. By default, the file format is NTFS. Click Next button.Note: When you choose FAT32, you will lose all data stored on the selected partitions.
Step 5. Check the box next to “Create a separate partition for storing files used during the installation.” Click Next button.
Tip: Before you continue, make sure that you have enough empty space on the harddisk.
Solution 5. Upgrade Windows 10 with the Media Creation Tool
The following steps show how to use the Windows 10 media creation tool to update Windows 10 to version 1903.
Step 1: Download the Windows 10 media creation tools.
Step 2: Run the media creation tool.
Windows 10 media creation tool
Step 3: Choose the language and region.
Choose the language and region
RECOMMENATION: Click here for help with Windows errors.
Frequently Asked Questions
Why I am getting Windows 10 Upgrade Error 0x80070070?
Windows 10 is a great operating system, but it does come with some issues. One of those problems is the infamous “Upgrade failed.” This error occurs when the upgrade process fails due to a variety of reasons. If you’re receiving this error, there are several things you can do to try and correct it.
The most common cause of this error is because you don’t have enough disk space. You’ll want to make sure that free space is adequate and that you’ve removed unnecessary files. Another reason could be that you installed another version of Windows without uninstalling the previous version. In this case, you’d need to uninstall the old OS and reinstall the latest version.
If none of these work, you might want to consider resetting your PC. Resetting your computer will delete everything stored on it and start over again. This will likely solve the issue.
How do I fix Windows 10 error 0x80070070?
Error code 0x80070071 occurs when there are insufficient free disk space on your computer’s main storage. This issue is caused by too many temporary files being stored on your system. To fix it, you can clean out some of those temporary files.
To do this, follow these steps:
1. Select Disk Cleanup under Tools and select OK
2. Once Disk Cleanup is finished, restart your PC
3. After rebooting, open My Computer again and check whether the size of your C:\ drive has increased. If it hasn’t, then delete unnecessary files from C:\ drive.
4. Restart your PC once again
5. Check whether the size of your D:\ drive has increased. Repeat step 4 and 5 if necessary.
If the problem persists, you can reinstall Windows 10.