How to Fix Static Sound/Noise in Windows 10

Static sound in headphones is one of the hardware problems after Windows 10 update. When you plug your headphones into your Windows 10 computer, your headphones make loud electrical noise or static noise. Then you will not be able to play audio files normally.

In general, static sound in headphones can be caused by many factors, such as: B. Problems with headphones, improper sound adjustment, faulty audio drivers, etc. E. If you hate it terribly and can no longer tolerate these static or buzzing sounds, keep reading to find solutions to fix it.

This static or crackling noise can be caused by either faulty equipment or a problem audio driver. Sometimes related settings also lead to static electricity and headphone distortion. For these reasons, remove hum or static sound in Windows 10, 8, 7.

There are various solutions that you can use to try and solve the static sound problem in your headphones yourself. Some of the methods below may take from a few minutes to several hours. Give it a try.

Check the hardware of the audio device

First, the problematic equipment of the headset, sound card, computer power adapter, audio device connector, etc. E. are responsible for the static noise in the headphones. Therefore, feel free to check the condition of the material corresponding to the audio material.

  1. Check the material of the helmet. Try connecting headphones or speakers to another computer or several computers to check if they work.
  2. Check the connections to the PC. Control the headphones through different USB ports with your computer to check the status of these ports.
  3. Turn off the power to the PC. You can also turn off the device, especially for users who experience static noise in their laptop headphones. It can fix crackling or static noise in Windows 10.
  4. Disconnect all external devices from your PC, for example. B. speakers, printer, USB memory device, etc. E. If the device interferes.
  5. If possible, clean the sound card with dry clothes.

If you immediately know the exact physical condition of your headphones or speakers, you can replace your headphones or repair your PC equipment if necessary.

Start the Audio Troubleshooter

Windows includes a number of troubleshooting features that can be used to quickly diagnose various computer problems and solve them automatically. Troubleshooting may not solve all problems, but it’s a good place to start if you have problems with your computer, operating system or connected peripherals.

Let’s run a sound troubleshooter and see if it helps.

  • Enter “Troubleshooting” in the search box and select the utility from the results.
  • The Troubleshooting window will open. Select the option “Show all” from the left menu.
  • Select “Play audio” in the list that opens and a new window will open.
  • Follow the troubleshooting instructions and apply the shown corrections.

Change the audio format

The most common solution to the crackle problem is to change the default Windows audio format. Many users reported that this simple procedure has fixed the problem. To change the audio format, right-click the speaker icon in the taskbar and select the Playback Devices option from the context menu.

The “Sound” window will appear and you will be automatically taken to the “Playback” tab. Select the default audio device you want to use for sound playback and click “Properties”.

  • In the “Speaker Properties” window, select the “Advanced” tab and in the “Standard Format” section select the sample rate and bit depth to be used. Select the 16-bit, 44100 Hz format (CD quality) and click “Apply” to save your changes, and “OK” to close the “Speaker Properties” window. Check to see if the crackling problem is solved. If you still hear claps and pops, try other sound formats.

Update Audio Drivers

Outdated or damaged drivers can cause many problems, especially with sound and graphics cards, and especially with Windows 10. Therefore an outdated driver can also cause static noise problems.

To make sure all your audio drivers are updated, go to Device Manager, find your audio device, and go to the Drivers Update section.

You can also go to your motherboard manufacturer’s website and download the latest audio driver from there.

However, if all drivers are updated, this is no problem and you should try some of the solutions below.

Disable sound effects

  • Go to Control Panel> Sound.
  • Go to Speakers> Properties> Enhancements. Disable Sound Enhancements
  • Uncheck all sound improvements> click Apply.

How to Repair Bluetooth Speaker Not Detected in Windows 10

When Windows 10 first came out, it was offered for free for those who wanted to upgrade to 8.1 and 7. Of course, many people wanted to try the new operating system for free. After all, reinstalling Windows 10 can cost hundreds of dollars.

However, many users found that the upgrade did not meet their expectations. Users should easily learn this new operating system and just see how it works. However, there were still problems that Microsoft did not expect, including the fact that Bluetooth could not find headphones and other devices. In particular, many users who migrated from the old operating system to Windows 10 found that the system could not find their Bluetooth devices. Do not panic, because there are a few more solutions that you can try, but do not reinstall Windows completely.

Many people use Bluetooth technology every day. These users can not perform their daily tasks without using Bluetooth-enabled devices. But what if Bluetooth can’t find the devices?

Make sure that Bluetooth is on.

If you are using a laptop computer with a physical Bluetooth switch on the case, make sure it is on.

In Windows 10, there are two ways to check if Bluetooth is enabled. Here’s how:

  • Check the system tray. Select the action center (or). If you do not see Bluetooth, select “Expand” to display Bluetooth, and then select “Bluetooth” to turn it on. You will see the message “Not connected” if your Windows 10 device is not paired with a Bluetooth accessory.
  • Check your settings. Click Start, then select Settings > Devices > Bluetooth and other devices. Make sure that Bluetooth is enabled.

Note. If you enable Bluetooth in the Settings, you will immediately see the following message: “It is now detected as “.

Start the hardware and device troubleshooter

Built-in hardware troubleshooter looks for problems and checks if all new peripherals or equipment connected to your computer are installed correctly. Follow these steps to launch the Troubleshooting Tool:

  • Press the Windows + W keys.
  • Type the troubleshooter into the search box and press Enter.
  • Click Hardware and Audio and start troubleshooting hardware and peripherals.

Restart the Bluetooth support service.

The Bluetooth service supports detection and pairing of remote Bluetooth devices. Stalling or disabling this service may prevent existing Bluetooth devices from working properly and prevent the recognition or assignment of new devices.

  • You may want to check that the associated services are running and working properly. To do this, press the Windows + R keys and type services.msc. Then right-click on the Bluetooth support service and select “Restart”.
  • Right-click the Bluetooth support service, select “Properties” and make sure that the launch type is Automatic.

Update your Bluetooth drivers

You can check the Bluetooth adapter manufacturer’s website to see if a driver is available for Windows 10. If a driver for Windows 10 is not available, you can simply download the latest driver.

Manually downloading drivers involves the risk of installing the wrong driver, which can lead to serious performance problems.

The safest and easiest way to update drivers on your Windows computer is with automatic software.

Activate Bluetooth audio service

  • Press the Windows + R keys, enter the Control Panel and press Enter.
  • In the “Hardware and sound” section, select “View devices and printers”.
  • Find a Bluetooth speaker, right-click on it and select Properties.
  • Click on the Services tab.
  • Make sure the audio receiver, speaker, and remote are selected and click “Apply”.

Change the Bluetooth download type

Once the previous Bluetooth service setting becomes unusable, you can now also try changing another Bluetooth setting. It may help to change the type of Bluetooth download.

1: Right click on Bluetooth Support and select Properties.
2: Find the Launch Type tab and scroll down to select Automatic.

This time you can connect your Bluetooth speaker to Windows 10. Windows 10 can recognize and recognize it.

We hope that at least one of these solutions has proven useful. If you have any questions or suggestions about the topic, just go to the comments section below.

How to Fix Windows 10 Store Error 0x803FB005

Several Windows 10 users reported that they encountered a 0x803fb005 error code when attempting to install one or more applications from the Microsoft Store. Some people say that this problem occurs by accident, while others say that it happens only with some applications. The error message is shown in the following image above.

Before you get to the solution of this error in the Windows Store you should know what is causing this code: 0x803fb005. We have analyzed several articles and listed some of the reasons below.

  • Third party antivirus programs are interfering.
  • The Windows Store is defective.
  • The system files are corrupted.

In the next section we will show you how to fix 0x803fb005 error code.

Exit the Store app, then login again.

This problem may arise for several reasons. First, check if you can open the Windows Store.

  • If so, open the Start menu and click the “Save” tile. You can also load the Store application using Windows Search (Win + Q).
  • Go to the upper right corner of the screen and click the image of your Microsoft profile.
  • Click on your account name or email address below the image of your profile.
  • Now click the “Exit” link to exit the Store application.
  • Reboot your device and login again.

Open the Windows Store app troubleshooter.

  • Click start
  • Here click the “Type” button to search.
  • Record about troubleshooting.
  • Click Troubleshooting Options to open the window shown in the screenshot below.
  • Select Windows Store Applications and click “Perform Troubleshooting”.
  • The Troubleshooting window will then open. Select the Apply Troubleshooting option for all expanded permissions.
  • After troubleshooting, restart Windows.

Install all pending updates

According to several users, this particular problem can also be caused by a Windows 10 bug that has already been fixed by Microsoft. It turns out that the fix for this particular problem was released in early 2019.

Note. If you already have the latest version installed on your computer, skip this method and go straight to method 3.

However, if you haven’t installed all the Windows updates waiting to be updated, this may solve the problem automatically (without following other recovery strategies). If you have any pending updates, follow the instructions below to make sure you have installed all available Windows updates with the 0x803FB005 bug fix:

  • First open the launch window by pressing the Windows + R key. Then type or paste “ms-settings: windowsupdate” and press Enter to open the Windows Update Center settings menu screen.
  • On the Windows Update Center screen, go to the right side panel and click Check for updates.
  • When the WU detects all pending updates, follow the instructions to install all types of updates (critical, patches, security, etc.).
  • If you are prompted to reboot your computer before installing each update, do so. Remember, however, to return to the same window at the next launch to complete the installation of the remaining updates.
  • After each update is installed, close the WU window and reboot your computer to make the changes take effect.
  • When the next launch sequence is complete, repeat the action that previously caused the error to see if the problem has been solved.

Reset the Microsoft Store

Reset the Microsoft Store and see if it helps.

  • To do this, open the Windows settings and go to Applications> Applications and Features.
  • Go to the right and find the Microsoft Store.
  • When you find it, select it and click the Advanced Options link.
  • Scroll down a bit and click the “Reset” button in the “Reset” section.

Conclusion

By performing the above steps, you can easily get rid of a specific error Microsoft Store 0x803fb005.

Which of the above solutions helped you to solve your problem? Let us know by leaving us a message in the comments section below.

How to Repair Chrome Sync Keeps Pausing and Asking to Sign in

Google Chrome allows you to synchronize a lot of information, including bookmarks and extensions, so you don’t need to send or forward them to other devices. However, it is not without drawbacks, as evidenced by the fact that many reported problems with Chrome synchronization on their computers. To be precise, users have reported the following problems.

Chrome synchronization is suspended. When you sign out of Gmail, Google Chrome automatically stops synchronization.

Chrome doesn’t synchronize bookmarks, extensions, open tabs or passwords – if you have this problem, turn off your antivirus software and see if it will help.

It doesn’t fix Chrome’s sync error: if Chrome keeps getting a sync error, just uninstall and then reinstall your browser to fix the problem.

Syncing Favorites doesn’t work: Chrome syncs don’t work with Favorites. If you have this problem, updating your passphrase to synchronize may solve it.

Read in order the detailed troubleshooting instructions for each problem.

Change Google Chrome cookie settings

Changing your cookie settings so that your accounts can synchronize data in Google Chrome will solve this problem.

  • open the Google Chrome window on your device.
  • Copy and paste this line in the Google Chrome window or enter it in the address bar and press Enter.
    • Chrome: // Settings / Content / Files Cookies
  • Now scroll down the settings window and click “Add” next to the “Allow” option.
  • Then copy or enter the file accounts.google.com in the “Site” section.
  • Then click “Add” to authorize this site.
  • Close the Google Chrome window.
  • Reboot Google Chrome on your computer.
  • The synchronization process works again.

Continue synchronization

If you leave a Google service such as Gmail, Chrome will stop synchronizing. Sign in to your Google Account to reactivate the synchronization:

  • On your computer, open Chrome.
  • Click Suspended in the upper right corner, then login again.
  • Sign in to your Google Account.

Leave the sync enabled when you exit or restart Chrome

If synchronization is disabled every time you close Chrome, you can change the settings.

  • On your computer, open Chrome.
  • In the upper right corner click “More”, then click “Settings”.
  • Click “More” at the bottom, then “Site Settings”, then “Cookies”.
  • Disable the cleaning of cookies and website data when you exit Chrome.

Several workstations

If you use Chrome Sync on more than one desktop, you need to make the two changes above for each desktop. This problem may appear on any workstation where you use Chrome and Chrome Sync. So it is best to apply it to all systems that use the same Google account for synchronization.

This “bug” started to appear towards the end of last year and it seems that synchronization is interrupted on average every two weeks. You can log out more or less often, but most users mark two weeks as an active synchronization period.

During synchronization, you won’t be able to access open tabs, added new tabs and browsing history from the Chrome browser in which you added them. Fortunately, after you enable synchronization again, everything will synchronize properly.

Add a Google Account page to authorized websites

  • Click “Personalize Google Chrome”, then click “Settings”.
  • Click Site Options to view more options.
  • Then select cookies and other website data to open the cookie preferences.
  • Click “Add” for websites that can still use cookies.
  • Enter accounts.google.com in the text box below.
  • Then click the “Add” button.
  • Then restart Google Chrome.

This is a proven solution to fix Google Chrome synchronization, if it keeps stopping.

As a last resort, you can also try to reinstall your browser if the above solutions do not eliminate synchronization.

Fix NVIDIA Driver not Compatible with this Version of Windows

NVIDIA is an American company, popular thanks to its graphics cards. Most high-performance gaming computers usually have the latest NVIDIA graphics hardware. In the process of manufacturing durable products can sometimes have certain problems. In this last installment of our troubleshooting series, we’ll look at an NVIDIA graphics driver that is not compatible with this version of Windows.

This problem occurs when attempting to install NVidia drivers. The end result is that the user cannot use the NVidia GPU because the drivers are not installed. Does this mean that NVidia does not support your version of Windows or you need a different graphics card? Don’t panic; if you encounter such a problem, you have contacted the address. We will explain why this error occurs, what it means and how to fix it.

Why is your NVIDIA driver incompatible with your version of Windows?

This issue has been reported by many Windows 10 users, including Windows 7 users. At the beginning of the bug, the drivers you are trying to install are not designed for the current operating system you are using. It is very simple: it is not the fault of the NVidia hardware or the GPU. It is exactly between the drivers and your Windows operating system.

Update your Windows 10

You are probably using an older version of Windows 10 that causes this problem. To solve this problem, all you have to do is install the latest operating system updates.

  • Press the Windows + I key to open the Windows 10 settings.
  • Scroll down and click “Update and Security”.
  • On the Windows Update Center tab, click Check for updates.
  • Confirm that all found updates are installed
  • Windows can be restarted several times during these updates. Do not interrupt.
  • Make sure the NVIDIA graphics driver is still incompatible with this version of Windows.

Use GeForce Experience

If you are not sure which Nvidia GPU you are using, GeForce Experience can help you with these drivers.

  • Log in to the GeForce Experience website.
  • Download and install the GeForce Experience application.
  • Make sure your monitor is connected to the Nvidia GPU.
  • Run the GeForce Experience application.
  • If you are prompted to update the application, accept it.
  • Click the Driver tab.
  • All updates for your drivers will be found.
  • Click Check for updates on the right to start checking manually.
  • When the latest driver versions are found, they will be displayed in the list.
  • Select “Custom installation” to open the file.

Note. You can use Express Installation in step 10 above, but you will not have access to advanced installation options.

If you find this method cumbersome, you can use the GeForce autodetect feature. From there, you can use it instead of manual scanning to automatically detect your GPU and offer updates.

Install a newer version of Windows 10

An earlier version of Windows 10 may cause this error. To install the GeForce GTX 1080 driver in Windows 10, you must install version 1511 or higher.

First, check which version of Windows 10 you have.

If you do not know where to check the version, follow these steps:

1) Simultaneously press the key with the Windows logo and the R key on your keyboard to display the launch window.

2) Enter winver and press OK.

3) The “About Program” window will appear, where you will see the version of Windows. For example, in the screenshot below you can see the version 1607.

4) If your computer shows a version lower than 1511, upgrade to a higher version.

Conclusion

If you choose to load NVIDIA drivers manually, you must download the version corresponding to the architecture of your system (32-bit or 64-bit). This is one of the most common reasons why drivers are not supported even with the correct version.

Using the above solutions, you can manually fix an NVIDIA driver that is not compatible with this version of Windows. NVIDIA also has an easier way to automatically detect your GPU and provide you with the correct drivers for your system.

What Is Csrss.Exe? Is It a Virus? Is It Safe?

You may not notice it, but at present there are a number of system processes hidden in the background of your Windows PC (if you use it). They allow you to browse this page, see the time, find out your last email address, update your computer and much more without interacting directly with these processes.

However, if you look at Windows Task Manager, you might be surprised how many system processes you don’t know are running. An example is csrss.exe. If you are wondering what csrss.exe is, don’t worry, it is not a virus. This is all you need to know about the Windows csrss.exe process.

What is csrss.exe?

The csrss.exe process is used by the Microsoft Client Server runtime subsystem to manage most graphical command sets on a Windows PC.

This process boots up automatically when you start the system. Csrss.exe is located in the C folder: \ Windows \ System32 and is mostly 6,144 bytes in size. Other known sizes are 4096 and 7680 bytes.

Can I turn it off or disable it?

You cannot disable this process because it is an important part of Windows. In any case, you do not need to disable it – it uses few resources and performs few important system functions.

If you go to Task Manager and try to finish the client-server process, Windows will notify you that your computer becomes unusable or will shut down. Click on this warning and you will see the message “Access denied”. This is a secure process and you cannot stop it.

Windows always starts this process at startup. If csrss.exe does not start when Windows starts, Windows will show up with error code 0xC000021A. This is how important this process is.

A virus with the same file name

Is Csrss.exe a virus? No, it is not. The real csrss.exe file is a secure Microsoft Windows system process called client-server execution. However, the authors of malicious programs such as viruses, worms and Trojans deliberately assign the same file name to their processes to avoid detection. Viruses with the same file name: TROJ_GEN.R47C3JT or TROJ_GEN.R3EC2L8 (detected by TrendMicro) and Trojan-Dropper.Win32.VB.ased or Backdoor.Win32.Gbot.bs (detected by Kaspersky).

To make sure that the malicious csrss.exe is not running on your computer.

How did Csrss.exe get into my computer?

Computer infections can spread in many different ways. Some of the most popular are spam campaigns, dummy software updates, unreliable and unofficial sources / tools for downloading software, trojans and tools for hacking software. To spread malware through spam campaigns, cybercriminals send out emails with infected attachments. The main purpose of these emails is to make the recipients download and open (run) the attachment. By opening it, users allow downloading and installing malicious programs. Unnecessary software updates are used to reproduce viruses and use them as tools to install computer infections instead of updates or patches.

They can also infect systems by exploiting outdated software bugs and errors. Peer-to-peer networks (e.g. eMule, torrent clients, etc.), Unofficial websites, free file hosting or free software download sites and other similar sources are widely used to present malicious executable files as legitimate and harmless files. Their use can make users install viruses. Downloaded and open files can be viruses. Trojans are malicious programs that cause chain infections. Once installed, they reproduce other infections. Many people use software piracy tools to bypass paid software activation. Unfortunately, these tools are used by cybercriminals to spread malware. Instead of activating the software, these tools can lead to the installation of malware.

How to fix 100% CPU with csrss.exe error

There are two main reasons why most users encounter the csrss.exe process at maximum CPU load. The first reason is usually because of a corrupted user profile. In this case you can fix the error by creating a new Windows user account and then deleting the old one. Remember to back up your information from your own files and other folders before deleting the old profile!

The second problem may be that the registry is corrupted. This problem usually occurs when the software you have written has been installed incorrectly, a hardware failure has occurred, or when you are too much confused with regedit. When there are problems with the writing, there is no right solution. However, the first thing I would like to try is to use a system recovery point to solve the problem. Try to go back to the date when you know that the system is 100% operational. If not, you can reinstall Windows 7.

How to Fix PowerPoint Errors While Exporting Videos

If PowerPoint can’t convert and export video, this guide will offer you four solutions to help you quickly solve the problem.

Use this troubleshooting guide if a problem occurs with a particular presentation or with all your presentations.

Note that PowerPoint 2016 for Mac does not support saving your presentations in video format. So there’s nothing you can fix. The ability to save video formats on Mac is supported in PowerPoint 2011, 2019, and Microsoft 365.

Check to see if it has anything to do with add-ins.

  • In the search box next to the “Start” button, type PowerPoint / safe and click “OK”.
  • Check if you have the same problem when exporting video.
  • When the problem is solved, click Options on the File menu and then click Add Settings.
  • Select “COM Settings” and click “OK”.
  • Uncheck all the checkboxes (Disable Add-ons) in the list and click “OK”.
  • Restart PowerPoint.

Do not use MIDI files for sound.

Yes, the MIDI files are very small and are not actually records, they are just notes that your computer plays for you. The problem is that the PowerPoint video output mechanism does not support these files. If you need to use the same music as a MIDI file, you will need to convert your MIDI file to a digital music format such as MP3 or WAV. Visit our MIDI to WAV manufacturer page to learn more about converting MIDI files to other formats.

Determine media compatibility

The first thing we are going to try is to set the right media compatibility settings in PowerPoint. This option configures everything so that you can play the built-in media without any problems.

To optimize media compatibility in PowerPoint:

  • Go to the “File” menu and select “Information”.
  • PowerPoint will determine if your media is incompatible with the program and display the “Optimize media compatibility” option. Select this option and PowerPoint will optimize built-in support.
  • Let the wizard analyze the embedded media. If an immediate solution is available, the wizard will fix the problem automatically.
  • If Media Compatibility Optimization does not solve the problem, at least it will show you the culprit. With this information you will know what to do next.

Check the codecs

If the right media codecs are not installed on your computer, you will face all kinds of problems when playing audio / video. Including the PowerPoint problem we are talking about here.

So check your codecs, if you already have them installed, and update them. If not, install it.

If you are not sure which codec pack to choose, check out our list of the best audio and video codecs for Windows.

Use Quick Repair Office Tool

Office Repair will help you solve problems with PowerPoint file corruption that may affect some features of the program.

  • Open the control panel, go to “Programs” and click “Delete Program”.
  • Select Office or Microsoft 365 and click the Edit button.
  • Select “Quick fix” to quickly scan and recover damaged Office files.
  • Check to see if you can export PowerPoint video. If the problem persists, run the online repair option.

Determine the value of the link

Setting the link value can solve the problem of PowerPoint inability to play media content. PowerPoint is usually used for small or limited connection values, so it is convenient to set the appropriate connection value. By increasing the link value in PowerPoint, you can embed larger files into slides. Here are the steps to increase the connection value.

Step 1: Open PowerPoint and select Options from the Tools menu.

Step 2: Select the “General” option. Here you will see the option to set the link value; H. Sound of links with file size greater than 500,000 KB (given as an example only).

Step 3: Select the desired range you want to set for the files and click OK to save the changes you have made.

Fix: The directory name is invalid – CD/DVD drive error on Windows 10

The “Directory name is invalid” error is a system problem that can prevent you from opening certain files or directories. Also, you cannot access storage devices including SD card, external hard drive, USB drive, DVD, etc.

To access your files and disk, see how to fix it below. Then you need to back up your files. This is the only way to avoid data loss in the event of an error.

The main cause of this error is corrupt, outdated, or incompatible device drivers, but it can also be caused by a damaged or faulty SATA port. So, without wasting time, let’s see how to actually fix the problem. Directory name is not a valid error in the troubleshooting guide below.

Disable / enable DVD player driver

  1. Right-click the Windows key and select Device Manager.
  2. Expand the DVD / CD-ROM.
  3. Right-click the DVD drive and select Properties.
  4. Click the Driver tab, then click Disable.
  5. If the driver is disabled, click Enable to enable it again.

Remove / reinstall DVD drive

  1. Right-click the Windows key and select Device Manager.
  2. Expand the DVD / CD-ROM.
  3. Right-click the DVD drive and select Remove.
  4. Restart your computer to reinstall the DVD drive.

Change SATA port

If you still receive the “Directory Name Invalid” error, the SATA port may be defective or damaged. In any case, changing the SATA port to which your CD / DVD drive is connected can fix this error in many cases. To do this, you need to open your PC / laptop case. This can be very dangerous if you don’t know what you are doing. Then you can mess up your system. Therefore, professional supervision is recommended.

Run the CHKDSK command

You can also run the CHKDSK command to determine if your device is damaged and repair it to resolve the “Directory name is not valid” error in Windows 10. To do this, follow these steps:

  • Press Windows + X, search for Command Prompt (Admin) and open it.
  • In the window that opens, enter chkdsk / f / r d: and press Enter.

If the device is damaged or has other errors, this command can fix them, and you can fix this error. Please note, however, that this utility will find and mark bad sectors on the device and help Windows not to read or save data in these sectors.

Update your hard drive driver

If the above two fixes don’t work, you can update the USB driver software.

Step 1. Open the run window, enter devmgmt.msc in the search box and click OK to display the Device Manager interface.

Step 2: Expand the Universal Serial Bus Controllers section. Then you need to right-click on the controller and select the “Update Driver Software” option from the pop-up list. Then you can follow the instructions in the wizard to complete the upgrade process.

Fix Windows 10 Update Error 0x800f0988, 0x800f081f or 0x800f08a

Customers using the November 2019 Update (version 1909) and the May 2020 Update (version 2004) will be bombarded with new and near-unresolved bugs.

In addition to post-installation issues, there are issues with installing updates. For example, when you install cumulative updates KB4565351 and KB4566782, you receive unique error messages such as 0x800f0988, 0x800f081f, and 0x800f08a.

“There were problems installing updates, but we’ll try again later. If you still see this and want to search the Internet or contact support, this might be helpful: (0x800f081f) “is one of the error messages.

In this article, we have discussed the errors mentioned above as well as some solutions to fix them.

Run Windows Update Troubleshooter.

You need to first run the Windows 10 Update Troubleshooter by following the instructions below and see if that fixes error 0x800f08a.

  • Open Windows Settings> Update & Security> Troubleshoot> Advanced troubleshooting.
  • Go to the right pane and select Windows Update.
  • Now click on “Run the troubleshooter” and let Windows solve the problem for you. It may take some time to identify problems. So be patient.
  • After completing the process, close the settings window and restart the device.

If troubleshooting Windows Update doesn’t resolve the issue, go to the next effective solution.

Try manually resetting the Windows Update service:

Open an administrative command prompt and enter the following commands one by one, and then press the Enter key.

  • wuauserv net stop
  • cryptSvc net stop
  • Clean stop bits
  • net stop msiserver
  • Ren C: \ Windows \ SoftwareDistribution SoftwareDistribution.old
  • Ren C: \ Windows \ System32 \ catroot2 Catroot2.old
  • Clean start wuauserv
  • clean start cryptSvc
  • Clean start bits
  • MSiserver clean start

Close Command Prompt and see if Windows Updates are working.

To fix Windows Update error code 0x800f081f, install the fix manually

Follow these steps:

  • Open the Microsoft Update Catalog website.
  • Enter the service pack number in the search bar.
  • Highlight the correct version that is compatible with your PC.
  • Click Download next to the service pack.
  • Click the MSU link to download it.
  • Double click the MSU file to apply the update.
  • Start over.

You can also stop the update that caused the installation. You can find it in Settings -> Update & Security -> Windows Update -> Stop Updates.

Apparently it didn’t work for everyone, and Windows 10 Aug 2020 Cumulative Updates have not been installed yet. If nothing works for you, it is best to wait for Microsoft to update the service pack in Windows Update.

Check the status of all Windows Update services

There are three services that you should check if you get error code 0xc0020036. You –

  • Windows Update
  • DCOM Server Process Launcher and
  • RPC endpoint mapper.

The first is directly related to Windows Update and the last two are dependencies.

Apart from the direct service, you need to know the dependencies of the Windows Update service and make sure they are working or not.

Fix: Microsoft Store Sign-in Error 0x801901f4 on Windows 10

If you are trying to sign in to Microsoft Store or any other service with your Microsoft account on your Windows 10 PC and encounter error code 0x801901f4, you can try the solutions in this article to fix the problem.

When you run into this problem, you will receive the following error message:

Something went wrong
Please try again later.
0x801901f4
User profile cannot be loaded.

Run the Windows Store Apps troubleshooter.

First, run the Windows Store Apps troubleshooter.

  • Open Start> Settings> Update & Security> Troubleshoot.
    Scroll down
    Click on Windows Store Apps.
  • Click Run the troubleshooter.
  • When you’re done, open the store again.

Re-register Windows Store

Press Windows + X and click Command Prompt (Admin).
Enter the following two commands and press Enter after each command.

  • PowerShell -ExecutionPolicy Unrestricted
  • $ manifest = (Get-AppxPackage Microsoft.WindowsStore) .InstallLocation + ‘\ AppxManifest.xml’; Add-AppxPackage -DisableDevelopmentMode -Register $ manifest

Note that if there is a problem with Windows Update, error 0x801901f4 is displayed. Try running the Windows Update troubleshooter and see if that helps.

  • Press the Windows key, type troubleshoot in the search box, and hit Enter.
  • Select Troubleshoot. Click Show All, select Windows Update Troubleshooter and follow the instructions on the screen.

Update device drivers

  • Right-click the Windows key and select Device Manager.
  • Check the driver of your video card (imaging device) first. If the driver is marked with a yellow exclamation mark, right-click it and select Update Driver.
  • Check all devices and update if necessary.
  • Restart your computer.

Clear Windows Store cache

  • Press Windows Key + S and enter WSReset.
  • Right-click the WSReset parameter and select Run as administrator.
  • Finally, it’s advised to restart your device and check if the problem is still there.

Perform a system restore

If you notice that the error occurred recently, it is possible that a recent change made by your system fixed the problem. In this case, perform a system restore and see if the problem is resolved.