Repair Microsoft Defender or Security Error 0x80073b01 on Windows 10

Error code 0x80073b01 indicates a failure between the Windows Defender and another security program on your computer or that the system files are corrupted and hamper its correct operation.

If this problem occurs, you will receive the following complete error message.

An error has occurred in the program during initialization. If this problem continues, please contact your system administrator.
Error code: 0x80073b01

This message may appear when you try to activate Windows Protector on your device, and it will not work. This error message only appears with some other symptoms, such as: For example, Windows Protector cannot be found in the Control Panel, and you cannot run it. You can still get the message that Windows Protector is active and protecting your computer. You may even be able to receive updates for it, but you can’t start it. You can even try to restore it with antivirus software or other recovery software, but you probably won’t be able to.

Remove third-party security software

Any third-party security software will interfere with the built-in security features of Windows Protector. This is probably the reason why this error 0x80073b01 is displayed. I strongly recommend that you remove it.

To uninstall any third-party software, follow these steps:

  • Access to the Control Panel
  • Click “Install / uninstall the program” -> click “Open”.
  • Select the list of installed programs.
  • Right-click the program.
  • Finally, click Delete.

After uninstalling or reinstalling, restart your computer/laptop.

Modify the Registry

  • Press Windows + R.
  • Type regedit and press Enter.
  • The registry editor will open.
  • Go to the following address and remove the msseces.exe entry from both:
    • HKEY_LOCAL_MACHINE / SOFTWARE / Microsoft / WindowsNT / Current version / ImageFileExecutionOption /
    • HKEY_CURRENT-USER / Software / Microsoft / Windows / Current version / Policies / Explorer / DisallowRun
  • Reboot the PC


  • Press start
  • Enter CMD
  • Select the Command Prompt from the list, right-click on it and run it as administrator.
  • Type the following command and press Enter:
  • sfc / scannow
  • After the scan is complete, restart your computer.

Reinstall Windows Defender or Security

However, after successfully removing malicious files from your computer, there is a good chance that Windows Firewall will still refuse to run. This is due to corrupted files in the Tools application. The only way to solve this problem is to reinstall the component. Fortunately, you can do so in the following ways:

  • First of all, launch the computer with full administrator rights.
  • Then press the Windows + R keys and type C: \ Program Files \ and press OK.
  • After downloading the program files, right-click on the Windows Protector folder, select “Delete” and then select “Yes”.
  • After successfully uninstalling Windows Protector, you will need to download and reinstall the application.

Re-register Windows Defender DLL files

You will need to re-register the DLL files of Windows Protector. Open a command line window with elevated privileges, type “regsvr32 filename” and press Enter.

You will need to re-register each of these DLL files. So, for each of these files, one by one, replace the “file name” with each of these files and press Enter:

  • regsvr32 wuaueng.dll
  • regsvr32 wucltui.dll
  • regsvr32 softpub.dll
  • regsvr32 wintrust.dll
  • regsvr32 initpki.dll
  • regsvr32 wups.dll
  • regsvr32 wuweb.dll
  • regsvr32 atl.dll
  • regsvr32 mssip32.dll

Reboot and see if it helped.

How to Fix Windows Update error 0x80240008 on Windows 10

Windows updates are very important because there are many security updates. If you are unable to update your system when it is not strictly necessary, you should fix the problem as soon as possible.

One of the many known problems with Windows updates is error code 0x80240008.

This is short for WU_S_ALREADY_DOWNLOADED. This means that the Windows update you want to download has already been downloaded. But in most cases it is not so.

If you are currently facing this particular problem, this article contains an effective list of troubleshooting actions. Here is a set of methods that other users have used in a similar situation to fix or bypass the 0x80240008 error code. If you want to increase your chances of success, follow the possible fixes below to find a method that will effectively solve the problem in your particular scenario. Let’s get started!

Run the Windows Update Troubleshooter

Select Start > Settings > Update and Security > Troubleshooting, then select Windows Update Center under Start, and then select Troubleshooting.

If not all problems are corrected, run the Troubleshooting Tool again to check for other errors.

Perform a Clean Boot

If the problem persists, perform a clean reboot and see if the problem is solved.

Converting your system to a clean boot state can help you determine if third-party applications or autoload items are causing the problem. Take a look at this problem in a clean boot state.

Perform the following steps to perform a clean boot in Windows 10.

  • Log in as an administrator. If you do not have an administrator account, you can create one. Create a local user or administrator account in Windows 10.
  • In the search box on the taskbar, type msconfig and select System Configuration from the results.
  • On the Services tab, under System Configuration, select Hide all Microsoft services, and then select Disable all.
  • On the Autoload tab of the System Configuration software, select Open Task Manager.
  • Under the Auto Download section of the Task Manager, for each Auto Download item, select the item, and then select Disable.
  • Close Task Manager.
  • On the Home tab of the system setup program, click OK.

Update the Registry

Then you need to clear the download path for the Windows Update Center. These steps are for advanced users only! If you ruin your computer with regedit, you risk losing your files! Be careful or use a professional tool to test your computer.

  1. Hold down the Windows key while pressing the “R” key.
  2. A small new window will appear.
  3. Type regedit in this new window and press Enter.
  4. In new windows you have navigation on the left side. Use it to navigate.
    HKEY_LOCAL_MACHINE \ SOFTWARE \ Policies \ Microsoft \ Windows \ WindowsUpdate
  5. When you find it, find WUServer and WIStatusServer in the right pane.
  6. If they are not listed, we will not be able to clear the boot path. Otherwise, delete both of them.
  7. Reboot the computer.

Remove the third-party antivirus or firewall.

Most users who encounter error code 0x80240008 have successfully solved the problem after removing a third-party security package from their system and using built-in solutions.

Depending on your version of Windows 10, the incompatibility of a third-party firewall may cause the 0x80240008 error code. You can check if your external security pack is responsible for the problem with the Windows Update Center by removing the third party antivirus and/or firewall.

Clear the Windows Update Cache and Components

The Windows 10 software distribution folder is a folder in the Windows directory that temporarily stores files you may need to install the Windows Update Center on your computer. This solution requires you to delete the contents of the Software Distribution Folder and restart the upgrade process.

How to Fix Performance Counter Error 0xC0000BB8

EventSentry may log error 0xC0000BB8 when a specific performance counter is unavailable or disabled.

If the counter is disabled, you can use the Extensible Performance Counter List utility to re-enable the counter. The error message looks like this:

Performance Counter PhysicalDisk (*) \ Avg. Disk Queue Length ‘could not be traced due to error’ 0xC0000BB8 ‘. Make sure there is a performance counter. If you are using a non-English version of Windows, the performance counters are named in the language of the operating system. “

If you see the following error in Server Manager for Server, the custom dataset is actually missing. This could be due to the fact that the administrator accidentally deleted the entry.

The power meter update failed due to the following error: The data collector set could not be found.

Manually rebuild performance counters for Windows Server 2008

Enter the following commands at the administrative command prompt to restore all counters, including extensible and third-party counters. Press ENTER after each command.

  • Restore counters:
  • cd c: \ windows \ system32
  • lodctr / R.
  • cd c: \ windows \ sysWOW64
  • lodctr / R.
  • Re-sync the counters with Windows Management Instrumentation (WMI):
  • Stop and restart the Performance Logs and Alerts Service.

Stop and restart the Windows Management Instrumentation service.

Create a new data collector set (do not use an existing data collector set).

Sometimes not all counters can be restored when starting lodctr / R. If you notice this, make sure that the c: \ windows \ system32 \ PerfStringBackup.INI file contains the correct information. You can copy this file from the same computer to restore the counters. This file may differ slightly from one computer to another. However, if you notice a dramatic difference in size, some information may be missing. Always make a backup before replacing, and there is no guarantee that copying this file from another computer will restore all counters. If possible, compare the file with computer backups to see if the file size has decreased at some point.

Update Server Manager Settings

Operations Console and Management Agents have code-dependent version levels. The Operations Console continually monitors the version levels of registered management agents. If it detects that the registered management agent is out of sync (incompatible) with the version level of the management console, it notifies the user that an update is required for the specific version of the management console. control. This can happen every time you change the version level of the management console, be it newer or older.

When you receive a notification, you must manually update the management agent. Failure to update the management agent can lead to unpredictable and unwanted results when Server Manager requests are made on the target computer that hosts the management agent.

How to Fix Update Error Code 8024200D

Error 8024200d or WU_E_UH_NEEDANOTHERDOWNLOAD means that the Update Manager has not installed the update because it needs to be downloaded again.

The easiest solution is to download the Update Installer package from the Microsoft Update Center directory and install it manually.

Check out the solutions listed below to fix the 8024200D update bug:

Run Windows Update Troubleshooter

Windows includes a number of troubleshooting features that you can use to quickly diagnose various computer problems and resolve them automatically. Troubleshooting might not solve all problems, but it’s a good place to start if you’re having problems with your computer, operating system, or connected peripherals. If you are experiencing the error “Possible Windows Update Database Error Detected”, running the Windows Update Troubleshooter will fix the problem. To find this fix, go to Control Panel by typing Control Panel in the search box and selecting the Troubleshoot option.

Now click on the Show All option in the left pane.

Locate the Windows Update Troubleshooter at the bottom of the list, right-click it and select “Run as administrator””. Follow the instructions and see if this resolves the Windows Update database error detected.

Start with a clean boot and check it out.

You can perform a clean slate reboot to see if a third-party application is causing the problem.

a) Press the “Windows + R” key on your keyboard.
b) Enter the text “MSCONFIG” in the “Run” window and press “OK”.
c) Click on the “Download” tab and clear the “Safe Download” checkbox.
(d) On the “General” tab, select the “Custom start” option and uncheck the “Load start positions” box.
e) On the Services tab, select the “Hide all Microsoft services” check box and click “Disable all”.
f) On the Start tab, click on “Open Task Manager”. In the Task Manager window, on the Auto Download tab, right-click any activated autoload item and select Disable.
g) Click “OK” and then “Restart”.

Start the System Ready for Update Tool

The security updates you download require the integrity of service packs, manifestos and components. If they are missing or damaged, an update may result in an error.

Use the System Update Preparedness tool to check if your system is working properly. Logs are created in the following cases

% SYSTEMROOT% \ Logs \ CBS \ CheckSUR.log

To facilitate the collection of logs, it is recommended to clear previous logs.

а. Find HKEY_LOCAL_MACHINE \ COMPONENTS. If it exists, save it and delete it manually.

б. Find pending.xml in C: \ Windows \ WinSXS. Save and delete.

against Check HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ ComponentBased Service, press “Ctrl + F” and find the KB number you installed manually.

When we find a suitable registry key, we will save it and delete it.

d.delete cbs.log (% SYSTEMROOT% \ Logs \ CBS \ CBS.log) and % SYSTEMROOT% \ Logs \ CBS \ CheckSUR.log

Then reinstall the updates you downloaded from the Microsoft Update Center directory to get the latest logs.

You can download the logs to your network drive and unlock the link here.

cbs.log / testsur.log / Event Viewer \ Windows Logs \ Application, System, Setup

Uninstall the recently installed update in safe mode.

An incorrect current update can break Windows and get stuck in another update cycle. Therefore, removing these updates might fix the problem. This must be done in safe mode.

Step 1. Go to the Advanced Settings page, click Startup Options and press F4 to enter Safe Mode for your computer.

Step 2. In Windows 10 Safe Mode, right-click Start to select Control Panel. Then go to “Programs and Features”.

Step 3: Click Show Installed Updates in the left pane. Select and uninstall recently installed updates to fix Windows 10 stuck and Windows readiness issue.

Finally, restart Windows 10 and the PC freeze issue during Windows deployment should be resolved.

How to Repair Installing Update Error 0x80070652

Although Windows 10 is the most sophisticated of all Microsoft operating systems, it is known for its unprecedented number of update errors that pop up unexpectedly and interfere with normal operation. A typical example is error 0x80070652: This problem prevents you from installing the updates your system needs to work properly on your computer.

If you’re looking for a solution for error code 0x80070652 on Windows 10, you’re on the right track: we’ve put together an overview of tried-and-true, easy-to-implement tips to fix error 80070652 when installing updates. Windows Day. Since there are many underlying issues that can cause the error in question, we recommend that you start at the first pointer on our list and continue until you find one that is useful in your scenario. For the best experience when troubleshooting an update issue, follow the instructions carefully.

Begin with a clean boot

Clean download is a good method to solve many Windows problems because it downloads Microsoft services without downloading any third-party applications whose conflicts can lead to various errors. This solution uses Windows 10 as an example to demonstrate how to perform a clean boot.

You should be aware of this before you begin to clean up:

  • You must be logged on with an administrator account because another account is not allowed to perform a clean restart.
  • Your computer may become unusable if you perform a clean restart. However, functionality is restored after a normal system startup.
  • If your computer is on a network whose policy settings may prevent you from doing this, we recommend that you do not configure the settings of the system configuration utility without the help of a technician.

Remove the latest updates

In some cases, updates do more harm than good. For example, they can cause Windows Update to fail. In such a situation, getting rid of the problematic update is justified. Here’s how to do it:

  • Open the Settings app (Windows logo key + I).
  • Click Update & Security.
  • Go to the left pane.
  • Select Windows Update.
  • Click more options.
  • Select Show update history.
  • Click Uninstall Updates.
  • Select the update you think is the culprit and then uninstall it.
  • Finally, check for error code 0x80070652.

Restart your Computer and Run Windows Troubleshooter

The obvious first step is to restart your computer. On more than one occasion, problematic users have resolved update issues with a simple restart.

Restarting can fix problems caused by certain system functions such as third-party programs or update services.

Another thing to do as soon as possible is hidden in the updated troubleshooting menu that comes with the Creators Update.

We now have troubleshooting tools that cover most of the system errors in one place. You can use the Windows Update troubleshooter in the following ways:

  • Press Windows + I to open the Settings app.
  • Open Update & Security.
  • In the left pane, click Troubleshoot.
  • Click Windows Update and run the troubleshooter.

Update your drivers

If your drivers are on the other side of the hill, it’s no wonder the 0x80070652 update problem is causing you a headache. The point is that you should always update your drivers to avoid deformation of your system.

You can update drivers manually, but this method is so complicated that we won’t go into details. Just make sure you know what software your system needs to work properly, and update the drivers for each of your devices.

Have our troubleshooting tips for error code 0x80070652 in Windows 10 been effective? We are happy to hear them!

Fix: Adding Printers via Group Policy are Not Installing Error 0x800703EB

Error 0x800703EB occurs when configuring printers using Group Policy. The rule is that the correct settings are made, but the printer does not appear. The following printer error may appear in Event Viewer:

Computer setup item “” in the “Printer {6CDA8498-65F2-4B71-BA11-666293604519}” GPO was not applied because it failed with error code d ‘0x800703eb This function could not be performed. This bug has been removed.

Group Policy settings were introduced in Windows Server 2008 and are still present in Windows 2012. Compared to Simple Group Policy, they expand the ability to customize computer and user settings.

In theory, GPP can use printers.

In the event log, you can see event ID 4098:

The GPO was not applied because of a failure with error code ‘0x80070bcb’. The specified printer driver was not found on the system and must be loaded. ” This bug has been removed. “

Redeploy Printer Using Group Policy

  • Open the Server Manager console and select the option to install the Print and Documentation Services role (if it is not already installed).
  • From the role services list, select the Print Server Service installation.
  • You can also install the Print Server Role using the administration tools using the following PowerShell command:
  • Add Windows Print Server, RSAT Print Services
  • After the role installation is complete, open the Print Management Console from the Server Manager> Tools main menu.
  • Now you need to add printers to your print server. Let’s start by installing the drivers.
  • In the Print Management Console, go to the Drivers section and start the Add Driver Wizard. Select the driver architecture type (x64 or x86) and click Next.
  • In the Printer Driver selection screen, select the driver for your printer. If the driver you need is not listed, click Install from disk and view. Enter the path to the inf-file of the printer. Install the drivers for each printer that you want to connect to the print server in the same way.
  • Select the driver you have previously loaded. In our example, this is a universal HP driver. Click on “Next”, then click on “Done”. Repeat the process for your other devices. The list of installed drivers is now displayed in the Print Management Console.
  • You can now install new printers. Go to “Printers” and select “Add Printer” from the pop-up menu. The Network Printer Setup Assistant provides four ways to install printers in the Print Management Console.
  1. Find printers on the network.
  2. Add a TCP / IP printer or web service by IP address or hostname.
  3. Add a new printer on an existing port.
  4. Create a new port and add a new printer.

Uninstall Apps/Programs in Windows 10

  • Start the setup via the start menu.
  • Click on “Applications”.
  • click Applications and Functions in the left pane.
  • In the “Applications and Functions” section on the right, find the program you want to delete and click on it. Then click “Delete”. You may need to confirm this by clicking “Delete” in the pop-up window.
  • Windows will delete the program and delete all its files and data. In some cases, the program may have its own uninstaller, which should open when you click “Delete”. When finished, the program will disappear from the list.

Usually, if the “Delete” button is gray and inactive, it means that it is built into Windows and cannot be deleted.

Check Background Intelligent Transfer Service (BITS) Settings

In Windows 10, Background Intelligent Transport Service (BITS) is an important component that helps the system and applications load and unload in the foreground or in the background between the device and the remote server, without affecting the network experience. This is achieved through intelligent priority and control management, as well as automatic stop and resume data transfer.

BITS also plays an important role in downloading files from Microsoft servers or peer-to-peer nodes to install updates in Windows 10.

While this is a smart feature, sometimes a service stops working and prevents the Windows Update Center, Microsoft Store, and other services from functioning properly.

Do some registry checks

Click here to start your computer. Navigate to the Windows Start button and click on it to open. Type regedit into this search box and press Enter. When the Registry Editor dialog box appears on your screen. Enter the command HKEY _ LOCAL _ MACHINE \ SOFTWARE \ POLICIES \ MICROSOFT \ WINDOWS \ WINDOWS UPDATES \ AU in this search box. After opening this command, switch to the AU folder on this tab. With this slide open, click the Delete button. Click OK to complete this process. Close all windows. Restart your computer.

Error 0X80072745: Windows Mobile-based device failed to connect due to communication failure

A Windows Mobile device cannot connect to the Windows Mobile Device Center with error code 0X80072745.

In Device Manager HP USB Sync works normally on mobile devices, but the record “Portable devices”, “Windows Mobile device” is displayed with a yellow exclamation mark. The “Install Hardware” dialog box indicates that the installation failed.

The Windows Mobile Device Center displays “Login” for a long period of time, then stops and displays a white cross in a red circle with “Error” next to it.

There are dozens of messages on the Internet about this topic, and no one seems to have a solution that really works. Here are the solutions you’re going to propose first.

Change the device manager settings

The solution to this error can be found in Device Manager. For some reason, it is a driver problem. A yellow warning sign appears in Device Manager on a Windows Mobile device when you connect a USB stick to a Vista laptop. In essence, you just right click on the device and delete it. Then unplug the USB plug from my rw6828 and plug it back in. Then the device will be correctly recognized, the driver will be installed, and the yellow sign will disappear.

New WMDC 6.1 installation

In the next four steps, make sure that your Windows Mobile device is not connected.

  • Remove old driver update installations from the Windows Mobile Driver Center / Windows Mobile Device Center.
  • Start again.
  • Reinstall WMDC 6.1 (
  • Wait until all device driver installation dialogs (which may / will continue after installing WMDC 6.1) are gone.
  • Connect your Windows Mobile device and wait for all device driver installation dialogs to complete or for tooltips to pop up. You should now be able to establish a new partnership with WMDC.

Turn on or off Microsoft Defender Antivirus real-time protection

Sometimes you may need to momentarily disable real-time protection. When real-time protection is disabled, files that you open or download are not scanned for threats. However, real-time protection will be automatically reactivated to protect your device.

  • Temporarily disable real-time protection
  • Select Start> Settings> Update & Security> Windows Security, then Virus & threat protection> Manage settings. (In previous versions of Windows 10, select Virus & threat protection> Virus & threat protection settings.)
  • Set the real-time protection setting to Off. And select Yes to check.

Restart Windows Mobile Device Center (WMDC)

  • To restart Windows Mobile Device Center (WMDC):
  • On your computer, click the Windows Start button.
  • Enter services.msc in the search box.
  • Select services.msc.
  • In the Services window, right-click Windows Mobile Device Connection and select Restart.
  • Note. If there are two entries for connecting a Windows Mobile device, right-click the second one.
  • A field indicating that when the connection of Windows Mobile devices is restarted, these other services will also restart. Do you want to restart these services? will appear. Choose yes.
  • Select Yes again.

Fix: Printer Error 0x00000005 – Operation could not be completed Access is Denied

When you try to set the default printer on Microsoft Windows, you may receive an error message:

The operation could not be completed (error 0x00000709). Double-click the printer name and make sure the printer is connected to the network.

Another possible error when setting the default printer:

The operation could not be completed (error 0x00000005). Access is denied.

“Unable to install printer. Operation could not be completed” may appear while installing or using the printer, especially after updating or reinstalling Windows. … Various problems can be the cause of the problem. If you encounter this problem, just try the following solutions and the problem should be resolved.

Change registry settings

You can do the following:

  1. Open the Windows Registry.
  2. Go to: HKEY_CURRENT_USER \ Software \ Microsoft \ Windows NT \ CurrentVersion \ Windows.
  3. Right-click the Windows folder and select Permissions ………….
  4. Activate the Full Control option under Allow here. Click Apply> OK to save your changes.
  5. Delete the next entry.
  6. Reboot the system.

Create new account

  • Scroll to the right edge of the screen, tap Settings, then tap Change PC Settings.
  • (If you are using a mouse, move the pointer to the lower-right corner of the screen, move the pointer up, click Settings, and then click Change PC Settings.
  • Tap or click Accounts, then click Other Accounts.
  • Tap or click Add account, and then tap Sign in without a Microsoft account (not recommended).
  • Tap or click Local Account.
  • Enter the username for the new account.
  • If you want this person to log in with a password, enter and confirm the password, add a password hint, and tap or click Next.

If your computer is on a domain, you can skip this step and click Next or, depending on your domain’s security settings, click if you like.
Tap or click Finish.

Start the print spooler service

The problem can occur if the Print Spooler service is stopped. So make sure the service is running. If it stopped, start. To check and start the service, follow these steps:

1) Press Win + R (Windows logo key and R key) at the same time to open the Run dialog box.

2) Enter services.msc in the run box and click OK.

3) Double-click Sprint Spooler to open the Properties dialog box.

4) When Service Status is stopped, click the Start button. And make sure the Startup type is set to Automatic. Then click OK to save your changes.

5) Restart your computer for the changes to take effect.

Manual installation of a PDF printer

  • Click Start> Control Panel> Devices and Printers.
  • Select Add Printer.
  • Select Add a local printer.
  • Activate Use an existing port and select Documents \ *. PDF (Adobe PDF) from the drop-down menu. click Continue
  • Click the Have Disk button.
  • Click on the browse button.
  • Go to C: \ Program Files (x86) \ Adobe \ Acrobat DC \ Acrobat \ Xtras \ AdobePDF
  • Select AdobePDF.inf from the list and click OK.

Many Adobe PDF converters are listed. However, count six from top to bottom and click Next (you may have to try several times to find the correct converter in the list that works with your version of Windows).
Name your printer, for example B. Adobe PDF.


Hopefully the solutions listed here will help you resolve the “Unable to install printer. The operation could not be completed. ” If you have any questions, please leave your comments below. We’d love to hear your ideas or suggestions.

Fix: File too large – The file is too large for the target file system

Have you ever received a “File is too large for the destination file system” message when copying or moving a file to disk? As mentioned earlier, this issue is specifically related to the target disk’s file system.

The file system controls how files are stored, identified, and organized on disk. On Windows, the most common file systems are FAT, FAT32, and NTFS. FAT, known as FAT16, only supports one file with a maximum size of 2 GB or less. For FAT32, the maximum supported single file size is 4 GB. In comparison, NTFS increases the maximum size of a single file to 16 TB.

Based on the above problem, the “File too large for the target file system” problem occurs due to the limitation of the maximum file system size of the target disk. Therefore, you can check the file system of your player. In most cases, this can be FAT or FAT32. Then you can convert the file system to NTFS. Here are 4 ways to get it. But first you need to make a backup copy of the disk. Otherwise, you will have to try to recover the data later.

File is too large for the target filesystem

Plug in USB and open explorer. Right-click on the USB drive letter and select Format. If the dialog box opens from the File System drop-down menu, select NTFS instead of FAT32.

Select “Fast Size” and click the “Start” button.

You can also open an elevated command prompt and run the following command:

  • convert X: / fs: ntfs / nasal security
  • Where X is the drive letter. For example, in my case it is G, so the command would be like this:
  • convert G: / fs: ntfs / nasal security

If the process is complete, try copying now.

Convert FAT32 file system to NTFS without data loss

  • Press Windows Key + X, then select Command Prompt (Admin).
  • Check which letter is assigned to the USB drive or external hard drive.
  • Enter the following command in cmd and press Enter:
    Note. Be sure to replace the driver letter with your device letter.

Convert G: /fs:ntfs /nosecurity

  • Wait a few minutes for the conversion process to complete as it may take some time depending on the size of your hard drive. If the above command fails, you will need to run Chkdsk (Check Disk) command to repair the disk.
  • In the Command Prompt window, type the following and press Enter: chkdsk g: / f
    Note. Replace the g: in the driver with your own USB stick.
  • Run the Convert G: / fs: ntfs / nasecurity command again, and this time it will be successful.
  • Then try copying large files to the device earlier and you get the “File too large for target file system” error.
  • This will successfully fix the file too large for the target file system error without losing any data on the hard disk.

Fix: Windows 10 Update and Shutdown/Restart do not work and do not disappear

As you probably noticed, whenever a new update is released and downloaded to your Windows 10 computer, the operating system replaces the Restart and Shutdown button with Update and Restart and Update and Stop. Most likely, this was done in order not to miss the update.

However, some users have found that sometimes these buttons still display the same message even after the necessary operations have already been performed, such as: B. Shut down or restart the computer. Similar cases occur when an update was installed incorrectly or failed. Because of this, your computer will prompt you to update and shut down every time. Follow the options below to resolve this dilemma.

Restart the file manager

Restarting Windows Explorer can solve many problems, especially if there is a problem with the user interface.

  • Right-click on the right side of the taskbar.
  • Click Task Manager.
  • Scroll down to Windows Explorer.
  • Right-click on Windows Explorer.
  • Click on reboot.
  • When you have killed him, press Win + R and press Enter after entering Explore.exe.

Run the Windows Update Troubleshooter

The Windows Update Troubleshooter is an extremely convenient way to automatically detect and resolve problems with Windows 10 updates. However, it is not included with the operating system. Therefore, you need to download the program from the official Microsoft website. And don’t worry, it weighs just under a megabyte.

Set the power switch to OFF

Change the Power Switch function. Open Control Panel> Power Options and select the functions of the Power Button on the left side. Set the Power Switch when I press the Power Switch to turn it off.

This should turn off the computer to install updates. This is of course a temporary measure.

Immediate shutdown without updating

If you want to shut down your computer without asking questions, type shutdown -s -f -t 0 in the Run line and press Enter. You can also try pressing Ctrl + Alt + Del and select Shutdown from the menu in the lower right corner.

Run the Windows Module Installer

The Windows Module Installer is a built-in Windows 10 service. Fixed fixed Windows updates.

  • Open a command line with administrator rights.
  • Type in the following and press Enter:
  • Run the trusted SC config = auto installer.
    After successful execution, the [SC] ChangeServiceConfig SUCCESS should be displayed when the query is displayed.
  • Exit and check if the buttons are back to normal.

Enter your initial status

If a third-party service has issues with the Windows Update Center, you can perform a clean reboot. You will need to disable all third-party applications and services that run when you start Windows 10 and only run Microsoft services. When you go into a clean boot state, click the “Refresh” button and turn it off.

Reset Windows Update Center

Finally, you can try resetting the Windows Update Center client using this official tool. There is no retrospective frame and the downloaded updates are not removed from your PC. Instead, it does:

  • Configure the registry services and partitions associated with the Windows Update Center to default.
  • Clear the files associated with the Windows Update Center in addition to the data associated with BITS.
  • If you’re not happy with this, you can always manually reset the Windows Update Center components.


Hopefully this annoying update and shutdown option is gone forever. While it is easy to ignore it, this extra step does ensure the overall security and stability of your computer.