Repair Printer Installation Error 0x000003eb

Updated December 2024: Stop error messages and fix your computer problem with this tool. Get it now at this link

1. Download and install the software.
2. It will scan your computer for problems.
3. The tool will then fix the issues that were found.

Fix printer install error 0x000003eb: If you are trying to install a printer but cannot do so due to error code 0x000003eb, you have come to the right place because today we will discuss how to fix this problem. There is not much information in the error message because it only says that the printer cannot be installed and displays the error code 0x000003eb.

The printer could not be installed. The operation could not be completed (error 0x000003eb)

However, if you solve the problem, you should conclude that the problem must be that the printer drivers are incompatible or damaged. And you’re right, the printer connection or installation error 0x000003eb occurs due to the fact that the drivers are somehow corrupted or incompatible. So, without wasting any time, let’s see how to fix printer installation error 0x000003eb.

Reinstall in clean boot

Try installing the printer in clean reboot mode and see if that solves the problem. To fix error messages and other problems, you can boot Windows with minimal drivers and boot. This type of start is known as a clean start. A clean startup avoids software conflicts.

To get a good start and see if the problem is present, follow these steps.

I. Click Start, type msconfig in the Start Search box, and then press Enter.
II. If you are prompted for an administrator password or confirmation, enter the password or click Next.
III. On the General tab, click Selective startup.
intravenously In the Selective startup section, clear the Load startup items check box.
Cons Open the Services tab, select the Hide all Microsoft services check box, and click Disable All.
Vi. Click OK.
Vii. When prompted, click Restart.
VIII. After the computer boots up, install the printer.



Remove Printer Registry Keys

• Back up your registry settings.
• See Steps Here -> “Save Registry Settings”
• After backing up the registry, stop the Print Spooler service from the services console.
• Now go back to the registry editor and delete the following keys:
  • HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Print \ Environments \ Windows NT x86 \ Drivers \ Version-3
  • HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Print \ Environments \ Windows x64 \ Drivers \ Version-3
• Now, while holding down the Windows key, press R, enter the following path in the run dialog:
  • C: \ Windows \ System32 \ spool \ drivers \ w32x86 \ 3
    Rename here 3 to 3. old.
    Restart the print spooler through the service console and reinstall the printer.
• Then restart your computer and try reinstalling.

Check Windows Installer Service

• Hold down the Windows key and press R OR Click Start -> Type Run and select Run.

Then in the run dialog:

• Enter services.msc and click OK.
• Now find “Windows Installer Service” in the list of services, select it, right-click it and set the state to Automatic and Start.
• Then restart your computer and restart the printer drive installation.

Disconnect unnecessary devices

Disconnect external devices from your computer and try installing a printer. Steps to install the printer.

Go to Device Manager and disable it:

I. Sound card
II. Graphic card
III. LAN card
intravenous Modems
versus Ports (Serial and Parallel)

Conclusion

If you still cannot install your printer, you will need to completely uninstall it first and then reinstall it with new drivers. Be sure to use the CD-ROM wizard that came with your printer instead of the Add Printer option in Windows.

You have successfully resolved the printer installation error 0x000003eb. However, if you still have any questions about this guide, feel free to ask them in the comments section.

RECOMMENATION: Click here for help with Windows errors.